 For clubbers with flares and 225 tires up front |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Bigbohr |
 Aug 1 2004, 11:19 AM
Post
#1
|
|
Superlurker  Group: Members Posts: 224 Joined: 19-September 03 From: Houston, TX Member No.: 1,176  |
I test fitted my wheels on the car and it seems like there may be some interference when the wheels are fully turned. For the moment I installed them without spacers - but I will need some, prolly 1", to fill up the fenders. Purpose of the fitting exercise was actually to determine how much spacer is needed.
My wheels are Yoko ES100 225/45-17 and the rims are 17x7.5 with 23mm offset. For the moment it doesn't rub yet but with spacers installed it looks to me that the tire will hit the fender well in the area indicated on the drawing. I was wondering whether any other people have the same problem, and if so how you solved it. Thanks!!! Attached image(s) 
|
   |
 
|
Posts in this topic
Bigbohr For clubbers with flares and 225 tires up front Aug 1 2004, 11:19 AM
J P Stein I run 225 X 45 X 15 on 7 inch wheels.....22.75 inc... Aug 1 2004, 11:35 AM Bigbohr The smaller diameter of your tires helps. Accordin... Aug 1 2004, 11:47 AM TimT I have 225/50-16s on the front of my car, the tire... Aug 1 2004, 11:56 AM Bigbohr Looks like my first post may be a bit misleading. ... Aug 1 2004, 12:08 PM
d914 i run a 23x9.5x15 cantilver slick with 21mm spacer... Aug 1 2004, 03:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 01:42 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.