 Tach Kills Engine, When Tach is connected to coil, engine quites after running for 4 minutes? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| struckn |
 Dec 3 2011, 02:51 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,069 Joined: 9-November 11 From: South Central York Pennsyvania Member No.: 13,764 Region Association: MidAtlantic Region  |
This has me really confussed. I have Pertronixs in the dizzy and a MSD Blaster 2 Coil, Carb conversion from FI, '74 four. It runs great as long as the tach is disconnected at the coil. If I plug the tach into the negative coil terminal the engine will start, run normally and the tach works perfect at all RPM's. But after running only a few minutes the engine shuts down and will not restart unless I disconnect the tach wire from the coil. Any suggestions would be really appreciated, thanks.
Doug |
   |
 
|
Posts in this topic
struckn Tach Kills Engine Dec 3 2011, 02:51 PM
underthetire Do you have the ballast resistor on the msd coil? Dec 3 2011, 03:30 PM
struckn
Do you have the ballast resistor on the msd coil?... Dec 3 2011, 03:51 PM underthetire Better double check then, the pertronics units I t... Dec 3 2011, 06:51 PM struckn
Better double check then, the pertronics units I ... Dec 4 2011, 04:55 PM underthetire You can get them at radio shack btw, just a cerami... Dec 4 2011, 04:59 PM struckn
You can get them at radio shack btw, just a ceram... Dec 5 2011, 07:19 PM struckn Problem solved! Talked to Pertronix Tech and b... Dec 10 2011, 02:29 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 04:42 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.