 clutch cable, Clutch cable |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| partwerks |
 Dec 12 2011, 02:23 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,611 Joined: 7-September 06 From: Grand Island, NE Member No.: 6,787  |
First, does anyone know the size of the nut that goes on where you adjust the terry cable back by the clutch fork, as my mechanic lost/forgot to put the second nut back on and I plan on getting another one at Ace, but don't recall what size it is.
I put on that delrin pulley on back, but also was wondering if that bolt should also be replaced as maybe it has some wear with a bit of play in it as well?? I adjusted the cable and when the clutch grabs, the pedal is about 2" off the floor board. Is that about the correct distance. If not, do I need to tighten it or loosen it? After waiting about 5 seconds to put in reverse, it does not grind into gear. Is that any indication? |
   |
 
|
Posts in this topic
partwerks clutch cable Dec 12 2011, 02:23 PM
RonnieJ Bump Dec 12 2011, 04:48 PM GeorgeRud On the cable I have, it's a 7mm nut. I always... Dec 12 2011, 04:57 PM bigkensteele I thought that it was 8mm, but I could be wrong.
... Dec 12 2011, 05:37 PM dlee6204 The nut should be 7mm. Dec 12 2011, 05:54 PM Drums66 ......I'll join in 7MM :idea:
:wavebye: Dec 12 2011, 06:34 PM partwerks Once the snow dries off and I can take it for a dr... Dec 12 2011, 07:45 PM
bigkensteele
Once the snow dries off and I can take it for a d... Dec 12 2011, 07:56 PM 914.SBC I had a hard time finding a 7mm. If you dont have... Dec 12 2011, 08:34 PM partwerks The nut in front is not a Ny-loc, but the outer on... Dec 12 2011, 08:43 PM bigkensteele
The nut in front is not a Ny-loc, but the outer o... Dec 12 2011, 08:50 PM Dave_Darling Double-nutting is more than sufficient. In fact, ... Dec 13 2011, 10:22 PM partwerks I slithered under the car and put the 7mm nyloc nu... Dec 18 2011, 04:30 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:48 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.