 914/6, Oil line wrenches |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bcheney |
 Jan 12 2012, 10:47 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,341 Joined: 16-November 03 From: Orlando, FL Member No.: 1,348 Region Association: South East States  |
Is there a special set of oil line wrenches that can be used with the set of lines in this picture? Is there a special wrench that allows you to take the line at the bottom of pic off the oil tank while the tank is installed in the fender well of the car? Or do you just need to install or remove the line from the tank by taking the tank out?
Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
bcheney 914/6 Jan 12 2012, 10:47 PM
jim912928 I got this set from Harbor Freight and used them o... Jan 12 2012, 11:37 PM GeorgeRud 32 and 36mm wrenches are what you need. The HF se... Jan 13 2012, 04:06 PM
mepstein
32 and 36mm wrenches are what you need. The HF s... Jan 13 2012, 04:42 PM 6freak 36MM crows foot and long ext will work on the bott... Jan 13 2012, 04:24 PM bcheney
36MM crows foot and long ext will work on the bot... Jan 14 2012, 09:59 AM 6freak
36MM crows foot and long ext will work on the bo... Jan 15 2012, 11:17 PM PeeGreen 914 http://www.google.com/products/catalog?q=p...ved=0... Jan 13 2012, 04:46 PM Krieger I will be attempting this today with no specialty ... Jan 14 2012, 11:08 AM bcheney
I will be attempting this today with no specialty... Jan 14 2012, 11:27 AM Krieger Okay, that was easy. Been in and out 3 times in a... Jan 14 2012, 02:56 PM Krieger Here is a picture someone posted the other day. T... Jan 14 2012, 02:59 PM Krieger In and out again, readjust hose to be parallel to ... Jan 14 2012, 03:15 PM Krieger okay not quite parallel to the seam of the tank ma... Jan 14 2012, 03:41 PM 6freak quote name='bcheney' date='Jan 12 2012... Jan 18 2012, 09:32 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 09:35 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.