 Stub axles, hubs, ?s |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Qarl |
 May 2 2003, 03:55 PM
Post
#1
|
|
Shriveled member  Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None   |
My race shop guy is helping me put together my driveline for my six conversion.
He would like me to use '72/'73 axles for the rear, which will necessitate changing the output flanges for the tranny, and the stub axles as well. He says the '72/'73 axles are different than the '71 and earlier axles. However, I can't seem to find differentiation from any of the parts houses. Are the '72/'73 STUB axles different than other early (i.e.. 69 to 71) stub axles or can I use '70 stub axles to mate to the '72/'73 axles? Also, will these stub axles fit into a 914 hub that is drilled for five bolts, or do I need to find '72/73 hubs as well (i.e., is there a spline difference)? What about the the output flanges for the tranny? He says I need to find the 901 output flanges from a 911 from the same year as the axles. Something about length differences. Brad, you're a guru in this area? What do I have to locate? |
   |
 
|
Posts in this topic
Qarl Stub axles, hubs, ?s May 2 2003, 03:55 PM
Brad Roberts Nothing.
Shoot me 400$ and I will send you e... May 2 2003, 04:19 PM Qarl Brad, thanks for the reply.
I still need clarific... May 2 2003, 04:30 PM
Brad Roberts From what I have gathered...
All of the CV/axle s... May 2 2003, 04:36 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th July 2025 - 10:11 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.