 2316 Longevity report, What I found was very promising |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jake Raby |
 Sep 6 2004, 06:51 PM
Post
#1
|
|
Engine Surgeon  Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States  |
Looks like I can raise the bar on this one a tad bit more. Its working out incredibly!
http://www.shoptalkforums.com/viewtopic.ph...7390&highlight= |
   |
 
|
Posts in this topic
Jake Raby 2316 Longevity report Sep 6 2004, 06:51 PM
URY914 Jake,
What is the bore / stroke combo to get to 2... Sep 6 2004, 07:01 PM Jake Raby 80x96 Sep 6 2004, 07:25 PM URY914 That's what I thought.
I still have my 97mm A... Sep 6 2004, 07:35 PM Jake Raby yes, of course... The 80 stroke with the 5.325 rod... Sep 6 2004, 07:46 PM Jake Raby paul, whats the pin height on those pistons??? Tha... Sep 6 2004, 07:53 PM URY914 2365
I like the sound of that. :trophy:
Paul Sep 6 2004, 07:55 PM URY914 I'll have to measure the pin height.
I don... Sep 6 2004, 07:56 PM URY914 Top to centerline of the pin, right? Sep 6 2004, 07:57 PM Jake Raby what pin size are they??
measure from the top of ... Sep 6 2004, 08:27 PM URY914 I measured the pin and it's a 24mm.
And if I ... Sep 6 2004, 08:47 PM Aaron Cox Jake Raby Thats a very low pin height. It is set up for a st... Sep 6 2004, 09:14 PM URY914 Or use my stock 2.0 crank and run them as is?
Bec... Sep 6 2004, 09:38 PM Jake Raby A stock cylinder can be bored to 97mm.......
You ... Sep 6 2004, 09:49 PM Aaron Cox are they like domed pistons or something? Sep 6 2004, 09:50 PM Aaron Cox FYI arias piston thread Sep 6 2004, 09:53 PM URY914 see here... Sep 6 2004, 09:54 PM Aaron Cox lightweight and domed i see..... Sep 6 2004, 09:55 PM URY914 Jake,
What would a set of JE's with 22mm pin, ... Sep 6 2004, 09:58 PM URY914 lightweight pin too, Sep 6 2004, 09:58 PM Jake Raby And a positive dome...... Yowzas! That must be... Sep 6 2004, 10:01 PM URY914 Thanks!
You just saved me the cost of a crank... Sep 6 2004, 10:07 PM Jake Raby yeah, but lighten the hell out of them!!... Sep 6 2004, 10:10 PM Andyrew GAHHH
JUST SEND HIM YOUR ENGINE AND LET HIM HAVE ... Sep 6 2004, 10:12 PM URY914 What about a aftermarket stock length rod, CB Supe... Sep 6 2004, 10:15 PM Jake Raby NOTHING has the std 2.0 big end in an aftermarket ... Sep 6 2004, 10:24 PM SirAndy URY914 Carrillo=$$$
Correct me if I'm ... Sep 6 2004, 10:38 PM Jake Raby . Keep my stock crank & add counterweights.
Nope,... Sep 6 2004, 11:02 PM URY914 Jake,
Once again you're a wealth of informatio... Sep 6 2004, 11:12 PM
Jake Raby Cool!
Won't be at Bug Jam this year, no t... Sep 6 2004, 11:43 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 04:35 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.