 1st oil change! Checking my list - am I set? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| auto_cran |
 Mar 12 2012, 08:56 PM
Post
#1
|
|
Member  Group: Members Posts: 56 Joined: 12-February 12 From: Dallas, Texas Member No.: 14,123 Region Association: None  |
So I'm getting ready to do my first oil change on our newly acquired '74 1.8.
Getting ready to order the following from Atlanta: Mahle-Knecht oil filter Victor Reinz Oil Gasket Set (includes 2 gaskets, crush washer for strainer, washer for drain plug) Anything else I need? Any tips/trickes I need to know about? I change the oil on all my other cars, but those are Toyotas, Fords, & Chevys. This is my first time owning & changing the oil on a German car. Also - my searches show most use 20W-50 oil in their 914. I'm in Dallas, Tx and I typically use 10W30 in most of my cars. Should I use 20W-50 in the 914? Any tips / suggestions are welcome! I still owe you all pics. Hope to get them by the weekend. thanks Chris (auto_cran) |
   |
 
|
Posts in this topic
auto_cran 1st oil change! Checking my list - am I set? Mar 12 2012, 08:56 PM
jcambo7
So I'm getting ready to do my first oil chang... Mar 12 2012, 09:02 PM luskesq You might also do a search on this site for oil re... Mar 12 2012, 09:39 PM type47 Be careful with the torque on the strainer nut it... Mar 13 2012, 04:27 AM
rwilner I'd recommend you also adjust your valves, esp... Mar 13 2012, 06:24 AM vsg914 Valvline VR-1 no longer has zinc and is priced hig... Mar 13 2012, 06:35 AM 1973-914-2L
Valvline VR-1 no longer has zinc and is priced hi... Mar 14 2012, 09:05 PM URY914 I like to jack it up outside and spray it down wit... Mar 13 2012, 06:59 AM auto_cran Thanks for all the tips & ideas! :) Wil... Mar 13 2012, 07:38 AM vsg914 If it was properly installed it will spin off by h... Mar 13 2012, 08:03 AM 914Mels I highly recommend leaving the strainer plate alon... Mar 13 2012, 03:22 PM krazykonrad Loosening the cap where you put in the oil helps g... Mar 13 2012, 04:05 PM Dave_Darling A "strap" wrench usually doesn't fit... Mar 13 2012, 05:46 PM auto_cran Wow - I'm getting a lot of good information he... Mar 13 2012, 08:45 PM Dave_Darling Yes, the gaskets are for the strainer.
Don't ... Mar 14 2012, 10:57 AM eyesright Is that the red 1.8 from craigslist? Looked like a... Mar 14 2012, 02:16 PM tadink I was able to get to everything I needed by drivin... Mar 14 2012, 03:11 PM GeorgeRud Ramps are nice to use for this. If you do use jac... Mar 14 2012, 03:31 PM auto_cran Ok - if I don't need to get the car too high, ... Mar 14 2012, 06:44 PM auto_cran Steve - is this what you got at AZ?
http://www.au... Mar 14 2012, 09:32 PM 1973-914-2L Thats the one .. the multi weight 20-50w .. had mi... Mar 14 2012, 09:43 PM NJ914Guy Hey guys, not trying to hi-jack this thread but wi... Mar 14 2012, 11:19 PM vsg914 The car needs to be sitting level to completely dr... Mar 15 2012, 04:17 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 03:41 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.