 BMW Caliper modification problem |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Apr 1 2012, 06:58 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
Long story how this happened however I was going to "upgrade" my front calipers to BMW 320i calipers. I was having the caliper flange machined and (long story) the flange is now a little too thin. The specs call for the flange to be 0.587" +/-0.005" and mine measure 0.539". Other than the obvious- scrap them and start with a new set- do I have any options? Can I can get a perfectly measured, very thin spacer and put it between the strut and the flange?
Also, are 19mm master cylinders needed for 320i calipers? |
   |
 
|
Posts in this topic
tornik550 BMW Caliper modification problem Apr 1 2012, 06:58 PM
rick 918-S 19mm master is needed or your peddle travel will b... Apr 1 2012, 08:16 PM
tornik550
19mm master is needed or your peddle travel will ... Apr 1 2012, 08:30 PM edwin I put some of the Alfa 75 Brembo calipers on my ca... Apr 1 2012, 08:50 PM rick 918-S Use the stock 914 calipers. Rebuild them with new ... Apr 1 2012, 10:50 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 04:39 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.