Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> L-Jet troubles
jmargush
post Jul 14 2012, 07:18 PM
Post #1


Member
**

Group: Members
Posts: 460
Joined: 8-June 04
From: Goshen, IN
Member No.: 2,176



I pulled the 1.8 out of my car because the compression was down to 80-85 on all 4 cylinders and I had a spaer engine which had compression reading at 120.

I swapped over all the injection and intake parts and harnesses after I had the running engine out of the car.
*Only thing I didn't change was the Engine temp sensor

I installed the good compression engine today and it doesn't start.

I have fuel to the rails
spark at the plugs

But it won't fire. Is there something to check that would keep the injectors from pulsing?

Thanks in advance for any possiblle solutions

Jeff
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
jmargush   L-Jet troubles   Jul 14 2012, 07:18 PM
bigkensteele   My guess is timing. Pull the #1 plug and then rot...   Jul 14 2012, 07:33 PM
Bartlett 914   My guess is timing. Pull the #1 plug and then ro...   Jul 14 2012, 07:56 PM
jmargush   replacement is a 1.8 I djusted the valves while t...   Jul 14 2012, 07:50 PM
dlee6204   First I would check to see if your injectors are a...   Jul 14 2012, 08:00 PM
messix   oil cap on? dip stick in? those off with cause ...   Jul 14 2012, 08:08 PM
Black22   FI Relay/connections? Resistor pack? Trust me, f...   Jul 14 2012, 08:13 PM
messix   dual relay over by the battery fires the injectors   Jul 14 2012, 08:18 PM
Als914   I pulled the 1.8 out of my car because the compre...   Jul 14 2012, 11:54 PM
Valy   assuming you have fuel running out the injectors a...   Jul 15 2012, 02:01 AM
jmargush   No firing at all, no back firing trying to wrap my...   Jul 15 2012, 05:06 AM
jmargush   Injectors aren't pulsing Am I correct in assu...   Jul 15 2012, 10:58 AM
McMark   Do you have a white wire from the FI harness conne...   Jul 15 2012, 11:00 AM
jmargush   Do you have a white wire from the FI harness conn...   Jul 15 2012, 11:29 AM
Black22   Do you have a white wire from the FI harness conn...   Jul 15 2012, 03:15 PM
rick 918-S   Check the direction of the fuel flow. If you accid...   Jul 15 2012, 11:16 AM
jmargush   Got it to start I ran the white wire from injec. ...   Jul 15 2012, 12:29 PM
zonedoubt   Read the L-jet troubleshooting guide here: http://...   Jul 15 2012, 12:41 PM
dlee6204   I strongly recommend Jeff Bowlsby for new harnas...   Jul 15 2012, 12:43 PM
Black22   I strongly recommend Jeff Bowlsby for new harna...   Jul 15 2012, 03:14 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 3rd June 2024 - 12:06 AM