 009 Distributor 90* off? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bandjoey |
 Aug 8 2012, 07:11 PM
Post
#1
|
|
bandjoey  Group: Members Posts: 4,926 Joined: 26-September 07 From: Bedford Tx Member No.: 8,156 Region Association: Southwest Region  |
Troubleshooting through items to start the motor. 73 2.0
Moved the motor to get cylinder #1 to TCD. At TDC the timing marks line up on the fan but the distributor rotor is not lined up at the notch in the distributor...see pic.. The rotor is lined up with the wire to cyl #1. Is this a 009 quirk, or is the distributor installed 90* off?? Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
bandjoey 009 Distributor 90* off? Aug 8 2012, 07:11 PM
McMark The notch is different on the 009. As long as TDC... Aug 8 2012, 07:14 PM benalishhero lets get a pic of the drive with the dizzy out. Aug 8 2012, 07:14 PM bandjoey Thanks Mark. It was my understanding that ...you ... Aug 8 2012, 07:24 PM The Cabinetmaker The diz will only go in one way. The drive gear wi... Aug 8 2012, 07:37 PM 02loftsmoor did you have the DIZ out??? Aug 8 2012, 08:44 PM Black22 Are you sure that's the TDC notch on the distr... Aug 8 2012, 08:54 PM avidfanjpl Looks wrong, Joey.
My experience is that the mark... Aug 8 2012, 08:58 PM aircooledtechguy The notch is off because the tang on the 009 dizzy... Aug 8 2012, 09:49 PM eitnurg There's a story on the rounds that No 3 cyl on... Aug 8 2012, 11:51 PM bandjoey This is a motor from one of World members, running... Aug 9 2012, 07:14 PM
bandjoey Aircooledtechguy made a statement about timing adv... Aug 9 2012, 07:18 PM aircooledtechguy
Aircooledtechguy made a statement about timing ad... Aug 9 2012, 09:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 05:35 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.