 axle questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| CoolAirVw |
 Sep 12 2012, 08:57 PM
Post
#1
|
|
Member  Group: Members Posts: 66 Joined: 4-July 06 From: Kansas City Area Missouri Member No.: 6,370  |
I need a bit of advice.
My customer has a kit car with what he is calling 'turbo porsche" axles. These axles are larger than the axle stubs coming out of the 901 trans he wants me to install in the kit car. I would assume the car used to have a 915 trans since the axle ends are larger than the 901 flanges. Can 915 axle flanges be installed in a 901 to make the axles fit? If not, would a good solution be to swap the inner joint? Would the splines be the same? This axle has 28 splines and measures slightly over 30MM. Is the space between axle flanges similar on 915 and 901? What I'm asking is "are my axles gonna be too long or too short" with the 901 in there?   |
   |
 
|
Posts in this topic
CoolAirVw axle questions Sep 12 2012, 08:57 PM
CoolAirVw bumptity bump bump bump??? Sep 19 2012, 07:31 AM pcar916 911 (915) flanges can be used if they are "co... Sep 19 2012, 08:03 AM Eric_Shea Sounds like you have 108mm CVs. You just need to f... Sep 19 2012, 08:54 AM
CoolAirVw The CV's have 6 bolts. So I'll need to wel... Dec 1 2012, 10:42 AM Eric_Shea I would not install the CV with just 4 bolts and n... Dec 1 2012, 11:48 AM Eric_Shea Here's a link to a set we did for a customer:
... Dec 1 2012, 01:07 PM SirAndy
Here's a link to a set we did for a customer:... Dec 1 2012, 02:09 PM Mark Henry
Here's a link to a set we did for a customer... Dec 11 2012, 04:43 PM CoolAirVw
Here's a link to a set we did for a customer:... Dec 11 2012, 04:05 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 07:39 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.