 Spring alignment |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kwlane |
 Sep 28 2012, 02:40 PM
Post
#1
|
|
Member  Group: Members Posts: 91 Joined: 9-February 12 From: Newcastle, WA Member No.: 14,108 Region Association: Pacific Northwest  |
  I used a homemade spring compressor to put what I was told are 100lb springs on to new Bilstein shocks. I carefully measured the length of the compressed springs on the original Boge shocks but when I relaxed the spring after putting on shock are not on completely straight. Not sure if this is a problem or not. I only did one so far. Don't want to buy a new expensive spring compressing tool if don't have too but if that is needed to do right will have to do so. Any advice? |
   |
 
|
Posts in this topic
kwlane Spring alignment Sep 28 2012, 02:40 PM
yeahmag Never seen that one before. Are the "ends... Sep 28 2012, 03:11 PM Jeffs9146 Lower the bottom spring purch and it should solve ... Sep 28 2012, 03:13 PM
ConeDodger
Lower the bottom spring purch and it should solve... Sep 28 2012, 04:23 PM SirAndy I used a homemade spring compressor
I never had t... Sep 28 2012, 03:39 PM toolguy You really don't care about the length of the ... Sep 28 2012, 04:04 PM Andyrew Aftermarket springs are loose, stock springs are n... Sep 28 2012, 04:36 PM kwlane Ok, thanks for all the replies! Ends of the sp... Sep 28 2012, 07:41 PM bandjoey I"ll look at mine tomorrow but i think the cl... Sep 28 2012, 08:12 PM kg6dxn My springs (200lb) do not look bent under compress... Sep 28 2012, 09:49 PM kwlane Its the bottom perch that came with the Bilsteins ... Sep 29 2012, 09:00 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:12 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.