 ended very quietly, electrical grimlins |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| karmanbuilt |
 Sep 29 2012, 08:14 PM
Post
#1
|
|
???  Group: Members Posts: 72 Joined: 7-July 08 From: Emmett, ID. Member No.: 9,262 Region Association: Pacific Northwest  |
Hi all, hope everyone had a good summer. Mine ended very quietly, like when you turn the key and nothing. I've gone thru this before, and know the drill. Bad ign. switch, or starter. New Bosch starter 4/12, new ignition switch 3/12. Drove most of the summer without trouble, and have heat shield on starter. Took off the starter, and had the local FLAPS check it out.....good. Ordered two (2) ign. switch from AA. Installed one, nothing. Knowing that these are cheap Chinese parts, installed the second....same thing. All I get is red (alt) light, and pump turning. Now my blower fan won't work, and I know both the fan, and pump share the same relay and fuse at the relay is good! Ground strap at trans good! Checked past posts on this problem without any sucess. What now, am I having a gray moment (IMG:style_emoticons/default/hissyfit.gif) ??
|
   |
 
|
Posts in this topic
karmanbuilt ended very quietly Sep 29 2012, 08:14 PM
brp986s Hey, don't be taking my :hissyfit: - I own :... Sep 29 2012, 08:34 PM
mburkhart The last time my car wouldn't even turn over i... Sep 29 2012, 08:39 PM tim_nd What year is your car? It might be the seat belt ... Sep 29 2012, 09:01 PM tim_nd
What year is your car? It might be the seat belt... Sep 29 2012, 09:03 PM mittelmotor
What year is your car? It might be the seat belt... Sep 30 2012, 12:29 AM Haudiosolutions Mine does this randomly, I found if I loosen the b... Sep 30 2012, 07:21 AM hcdmueller My relay board just quit on me last year. A bad c... Sep 30 2012, 12:57 PM karmanbuilt brp986s: Battery voltage 12.67, question: for a bu... Sep 30 2012, 06:00 PM tim_nd So 0 volts on pin 1 on the relay board when in the... Sep 30 2012, 06:05 PM The Cabinetmaker Oh, BS. 66 ain't too old to work on 914s. I... Sep 30 2012, 06:07 PM tim_nd I should also clarify, when checking pin 1 on the ... Sep 30 2012, 06:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 03:34 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.