 Syncing webers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| pitr256 |
 Dec 2 2012, 06:44 PM
Post
#1
|
|
Peter Milleson  Group: Members Posts: 10 Joined: 8-July 12 From: Allen, Texas Member No.: 14,645 Region Association: None  |
Hey all,
Got my 914 running to the point after sitting for 15 years where I can actually drive around the block. Trying to synchronize the webers and noticed that when I put the unisync over cylinder #1, the engine's rpms rise to over 2000. Noticed the same on cylinder #6 but not as pronounced. Opening up the unisync all the way still causes the reduced air to the intake to cause the rpms to rise. Is this normal? I have the idle and air mixture screws at the default settings and would try adjusting but it developed an oil leak under the oil filter somewhere so have to fix that first before tuning more. This car has been 2 steps forward, 1 step back all summer. Almost there though. Thanks for the insights. Peter |
   |
 
|
Posts in this topic
pitr256 Syncing webers Dec 2 2012, 06:44 PM
914itis I can't say much about the sync but as far as ... Dec 2 2012, 06:57 PM mskala Do a search at the 911 pelican parts technical bbs... Dec 2 2012, 07:19 PM Trekkor which carb tool are you using for synchronizing?
... Dec 2 2012, 07:45 PM pitr256 Thanks for all the tips. I am using the older unis... Dec 3 2012, 08:51 AM 9146986 Here's my carb tuning proceedure from a March ... Dec 3 2012, 11:27 AM larryM
Hey all,
Trying to synchronize the webers and no... Dec 3 2012, 10:08 PM ConeDodger I'd add, be sure every thing else is as it sho... Dec 3 2012, 10:52 PM Trekkor PK's write up is spot on.
I can dial in carbs... Dec 3 2012, 11:39 PM
euro911 The old style Unisyns do restrict the air intake .... Dec 4 2012, 12:22 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 08:15 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.