 Taking apart my first type 4 engine, Trying to split the case now, any suggestions? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Germancar-Junkie |
  Dec 28 2012, 10:23 PM
Post
#1
|
|
Man pedals aren't just for men  Group: Members Posts: 51 Joined: 14-January 12 From: Weekdays, MD - Weekends, WV Member No.: 14,004 Region Association: MidAtlantic Region  |
I have had a 1.8 on a stand since February. Last week I got up the nerve to strip off the heat exchangers, engine tins, heads and a quarter inch thick coating of oil and dirt. Not to mention six generations of rodent bedding. So here I sit. Stumped. How do I get the dizzy out? And check out these pics. Are these cracks or casting wrinkles?
Attached thumbnail(s)  
|
   |
 
|
Posts in this topic
Germancar-Junkie Taking apart my first type 4 engine Dec 28 2012, 10:23 PM
CG-914 Casting wrinkles!
But always get your case to ... Dec 28 2012, 10:26 PM Krieger There is one 13mm nut holding the distributor in. ... Dec 28 2012, 11:12 PM walterolin You might want to start with Tom Wilson's book... Dec 28 2012, 11:22 PM Dave_Darling I couldn't figure out how to move the distribu... Dec 29 2012, 12:43 AM
Germancar-Junkie
You should then be able to twist and pull the d... Dec 29 2012, 10:30 AM JamesM carefull with the hammer and pry bar, the case is ... Dec 29 2012, 12:30 PM stugray Did you loosen the adjustment screw and then remov... Dec 29 2012, 12:07 PM euro911 If the casting marks disturb you, a drill motor wi... Dec 29 2012, 12:22 PM Germancar-Junkie PB Blaster is a wonderful thing! :Qarl:
Too... Jan 19 2013, 03:53 PM bandjoey Jake Raby sells a complete tear down and rebuild D... Jan 19 2013, 04:16 PM stugray
If it does not come apart easy then you missed a... Jan 19 2013, 04:20 PM ConeDodger Dawn,
There is a great forum on the site called th... Jan 19 2013, 04:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 07:10 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.