 Floor pans and long at once, will my car collapse |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| type11969 |
 Nov 13 2004, 05:26 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,231 Joined: 2-December 03 From: Collingswood, NJ Member No.: 1,410 Region Association: North East States  |
One of the POs of my 914 decided to stick weld the passenger side floor pan in, it looks like crap. The inner and outer firewall were also fixed with this method, except that rust was cut out, and a shitty scab plate was welded over the vacancy. The hell hole received similar treatment. Since part of the floor pan in my car has to be pulled away to fix the inner rocker, I was thinking about taking the entire floor pan out at the same time. Then I got to thinking that with the hols in the long and rockers, and no floor pan, my car might just collapse. What do you all think?
|
   |
 
|
Posts in this topic
type11969 Floor pans and long at once Nov 13 2004, 05:26 PM
type11969 anyone got a guess? Nov 13 2004, 07:30 PM Jeroen You need a jig
Better yet, get a decent roller :r... Nov 13 2004, 10:16 PM echocanyons Good insurance would be to brace the longs and/or ... Nov 13 2004, 10:23 PM SpecialK Check this post out!
http://www.914world.com/... Nov 13 2004, 10:31 PM type11969 Thanks for that link, but I've read, and re-re... Nov 14 2004, 06:27 AM Racer Chris Are you planning to remove the entire floor pan?
H... Nov 14 2004, 06:39 AM type11969 I was thinking about doing that, but the passenger... Nov 14 2004, 07:39 AM Bleyseng If you put in a door brace and the long is braced ... Nov 14 2004, 12:27 PM Racer Chris ... Nov 14 2004, 12:37 PM
GWN7 If you brace the doors (top and bottom) and use ab... Nov 14 2004, 12:39 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 03:15 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.