 Good News/Bad News, Front end suspension |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ww914 |
 Apr 1 2013, 02:24 PM
Post
#1
|
|
914 Convert  Group: Members Posts: 435 Joined: 29-September 11 From: Central Coast, CA Member No.: 13,621 Region Association: Central California  |
So, I decided to check my suspension bushings and see what size torsion bars were in there. The rubber bushings were not in that bad of shape, but while I have it apart I ordered polybronze bushings to put back. The good news was that I discovered that someone had previously installed 22mm torsion bars. I wanted to put in at least 21mm bars, so I'll just keep what I have. The bad news is that the one marked R was on the left side of the car, looking forward, and the one marked L was on the right. The book says not to switch these, so should I put back the L on left and the R on the right now and does it matter which end goes to the front, that is the marked end or the unmarked end?
Thanks in advance. |
   |
 
|
Posts in this topic
ww914 Good News/Bad News Apr 1 2013, 02:24 PM
brant I would put them back the exact way they were when... Apr 1 2013, 02:31 PM
ww914
I would put them back the exact way they were whe... Apr 1 2013, 04:12 PM McMark :agree: Apr 1 2013, 03:54 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 12:44 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.