 Help with removing/replacing gear selector shaft seal, Wrong replacement? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| john_g |
 Jul 4 2013, 08:27 PM
Post
#1
|
|
Member  Group: Members Posts: 110 Joined: 1-November 12 From: british columbia Member No.: 15,100 Region Association: Canada  |
I'm replacing the shaft seal and the O-ring in the gear selector console, and I'm having trouble removing the old shaft seal. The top rim of the seal is metal, and it won't budge. I've dug out the rubber part of the seal underneath it, but that's it. Also, the replacement I have is all rubber - the right diameter, but clearly not the same (part number is 900-112-001-50). See photo - any help/advice for me?
 |
   |
 
|
Posts in this topic
john_g Help with removing/replacing gear selector shaft seal Jul 4 2013, 08:27 PM
euro911 It may be tight, but should come out with enough l... Jul 4 2013, 08:37 PM
john_g
It may be tight, but should come out with enough ... Jul 4 2013, 08:52 PM mrholland2 I JUST did this. It is difficult to get the old o... Jul 4 2013, 09:38 PM john_g Got the old one out and the new one in!
Next ... Jul 5 2013, 04:27 PM Dr Evil regular tq for a 13mm nut....I dont know off hand,... Jul 5 2013, 04:36 PM john_g Thanks, Dr. That's what I did (probably about... Jul 5 2013, 06:12 PM mrholland2 I don't think you can screw that part up, to b... Jul 5 2013, 06:17 PM john_g Did you replace the skinny little "rubber... Jul 6 2013, 10:20 AM stugray
I just did this: I used two huge washers and a l... Jul 5 2013, 09:34 PM stugray There was no rubber O-ring with my bushing.
It was... Jul 6 2013, 11:10 AM Dave_Darling Not at the firewall, Stu--around the side-shift co... Jul 6 2013, 12:56 PM john_g Stu,
This is the O-ring from the selector console ... Jul 6 2013, 04:38 PM stugray Ahhh. I was referring to my comment about the fir... Jul 6 2013, 07:56 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 05:46 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.