 Remote Oil Temp Sender Cover Plate, gasket?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| lsintampa |
 Aug 13 2013, 01:50 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 520 Joined: 28-January 13 From: Tampa, FL Member No.: 15,441 Region Association: South East States  |
75 914/4 2.0 FI
OK, so while I'm waiting on the final verdict on my fuel injector cleaning project, I thought I'd chase down an oil leak. What I found was that oil was seeping out of the cover plate for the remote oil temp sender. I removed the cover plate that is held on by two 10mm bolts. With the cover removed, oil really seeped out of the bolt holes. I assume and hope that's OK? Question is, if they leak that bad, shouldn't there be a gasket for that cover? The cover and the plate that the sender mounts to were very nicely cleaned and powder coated, but no gasket. I see a gasket in the PET, but not sure if it is for the cover plate or the inside plate that the temp sender screws into? Thanks, Len |
   |
 
|
Posts in this topic
lsintampa Remote Oil Temp Sender Cover Plate Aug 13 2013, 01:50 PM
r_towle gasket
plate with sender
gasket
o-ring
cover plate... Aug 13 2013, 02:01 PM type47
I removed the cover plate that is held on by tw... Aug 13 2013, 02:32 PM
lsintampa
I removed the cover plate that is held on by t... Aug 13 2013, 03:14 PM ThePaintedMan
So when I go to do it right, how much oil can I ... Aug 13 2013, 03:28 PM stugray
:agree:
You can put it on without the outer co... Aug 13 2013, 03:12 PM Valy See my signature for the paper gaskets. Aug 13 2013, 03:57 PM 396 Valy, you da man. Thanks Aug 14 2013, 08:29 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 10:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.