All Sold - please delete, Reduced Price on Tangerine Header Options

[914forme]

Okay this is currently in my car. Has never been fired up, just rotated. I am in the process of redoing this car for a auto-x runner. And going with a conversion to a big 6.

I picked this engine up out of NC, have all the receipts for this from the original owner. I swapped out the rocker arms form Jake Raby's Type-4 store with 911 adjusters, and 1.7L rockers, and solid spacers. I added a 1-3/4" Tangerine racing header to the engine, with a race silencer. The engine has a Mallory Dizzy, CB Performance Plug wires, they are huge. A Mallory Coil, and a Summit racing CDI box. I used it to get a clean tach signal. Induction is a set of 45mm Dells, with water shields, filters, and Tangerine Racing cable throttle linkage. That is a real nice setup. It has been attached to my 901 transmission with a ZF limited slip, and stock gearing. Starter has been replaced with a high torque unit to move the engine. The stock starter would not allow it to budge. I will toss in the Renn-shifter, and Tangerine racing shift linkage, this solves all the issues with the side shifter. I have over 7 grand in this combination.


I can piece out
Engine $800 - sold
Transmission and linkage and shifter with ZF Limited Slip $1300 Not Sold, keeping for my six
Reduced ****Tangerine Racing 1 3/4 Header $1300 with stub pipes and Silencer Make some one a killer deal here on this header.
Mallory and related items $200 - sold
Dell 45mm and linkage $500 - sold
Starter $100 - sale pending
Rennshifter and Tangerine Linkage - sold