 Underbody sway bar |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| r_towle |
 Oct 24 2013, 05:53 PM
Post
#1
|
|
Custom Member  Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
 |
Is there some trick to get the underbody sway bar back into the bushings?
The geometry says no way..... I had to take off a control arm to heat up the nut on the ball joint so I could get it off. Now I cannot get the control arm in the cross member with the sway bar in the bushing, and if I take out the sway bar, and put the control arm in the cross member, I cannot possibly bend the sway bar enough to get it to line up with the bushing. |
   |
 
|
Posts in this topic
r_towle Underbody sway bar Oct 24 2013, 05:53 PM
jimkelly pic Oct 24 2013, 06:03 PM
r_towle
pic
Pretty, now put it in and let me know how th... Oct 24 2013, 07:17 PM carr914 I hope someone has an Answer as I'm close to p... Oct 24 2013, 09:42 PM toolguy Push one side through its bushing further, then th... Oct 24 2013, 09:47 PM Jeff Hail It can be done in the car. Suspension at full dro... Oct 24 2013, 09:59 PM r_towle
It can be done in the car. Suspension at full dr... Oct 25 2013, 06:47 AM carr914
When the veins in your forehead start coming out... Oct 24 2013, 10:29 PM balljoint Some red wine and Sade will also help. Oct 25 2013, 05:15 AM jimkelly pic is not mine - but for reference only.
it seem... Oct 25 2013, 05:29 AM r_towle
pic is not mine - but for reference only.
it see... Oct 25 2013, 06:52 AM Dave_Darling Because it was cheaper to build. Just bend up the... Oct 25 2013, 12:42 PM balljoint Wait wait wait!
Does this mean the flares are... Oct 25 2013, 05:33 PM r_towle
Wait wait wait!
Does this mean the flares ar... Oct 25 2013, 07:05 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th June 2024 - 04:10 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.