 Ideas, suggestions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| computers4kids |
 Jan 22 2014, 09:29 PM
Post
#1
|
|
Love these little cars!  Group: Members Posts: 2,443 Joined: 11-June 05 From: Port Townsend, WA Member No.: 4,253 Region Association: None  |
Ever since I did my SBC conversion, I've never been happy with the sharp turn the 1 1/4 gate hose had to take from the water pump to follow the bottom of the car. When the hose is cold the turn actually causes the hose to kink, but once the pump pressurizes the system the hose fills out and unkinks.
Anyway, what I need to do is add a 90 degree turn either with some pipe or a formed piece of radiator hose. I would appreciate some ideas how you would approach this. Ideally it would be nice to have a curved piece of pipe welded to outlet on the pump, but not even sure if you can. It's made of cast aluminum I believe. This would then only require one clamp where the pipe would join the hose. Alternately, I could purchase a 90 degree radiator silicone elbow but then would also need a union tee and multiple places to clamp. In an old posting, I saw that someone said that Renegade offered a 90 degree tee. Ideas?  Attached image(s)    
|
   |
 
|
Posts in this topic
computers4kids Ideas, suggestions Jan 22 2014, 09:29 PM
ThePaintedMan Why not take the elbow off and bring it to a radia... Jan 22 2014, 09:47 PM wildman Usually when I have that sort of problem I go to m... Jan 22 2014, 09:49 PM JRust I have done it a couple ways. The formed hoses are... Jan 22 2014, 10:26 PM SLITS The are hoses made with a wire spiral in them to k... Jan 22 2014, 10:32 PM partwerks That's what I did when I re routed my radiator... Jan 23 2014, 07:38 AM bulitt Jim Kelly used a 90degree. Think he got it off eb... Jan 23 2014, 07:59 AM Phoenix-MN NAPA had an online catalog of their hoses. It lis... Jan 23 2014, 08:45 AM jimkelly a better pic I just took. Jan 23 2014, 08:47 AM
computers4kids Thanks all for your ideas. Jim, that's pretty... Jan 23 2014, 10:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 07:32 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.