 Qarl's NEW 914-6-GT Street Car Conversion Thread, 2014 Progress Thread |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Qarl |
 Mar 14 2014, 10:16 PM
Post
#1
|
|
Shriveled member  Group: Benefactors Posts: 5,233 Joined: 8-February 03 From: Florida Member No.: 271 Region Association: None   |
A continuation of the original thread...
914 GT Build Thread 2014 Progress Thread... Figure I'd post some pics... In between I've been sorting out the body... basically marking up problems with a sharpie and noting all my issues for the new body guy. I've been mock fitting some fiberglass rocker panels and valences. Drilling holes for oil lines in driver's rocker area. I also fitted the front oil cooler shroud. Today I had to do some fitment of the Engman inner longs. I had to punch holes for the Rich Johnson Engine mount through-bolts that are inside the tub... and trim some areas that were a little tight, etc. (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857002.1.jpg) Here are doors, bumpers and Engman inner long stiffening kits. (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857005.2.jpg) I admired Dr. Evil's Tranny work... (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857006.3.jpg) Dusted off the 3.2L Short Stroke, with 98mm P&Cs, modified S-cams, 46mm Webers, and a bunch of internal goodies... (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857007.4.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857009.5.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857231.1.jpg) A new "Lost Warehouse" discovered... Almost everything refurbished or new. I've spent 3-4 days sorting through ALL the parts. Placing things in bins by body area (brakes, transmission, electrical, trim, interior, oil, fuel, etc.) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857011.7.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857013.8.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/dl.dropboxusercontent.com-271-1394857273.1.jpg) |
   |
 
|
Posts in this topic
Qarl Qarl's NEW 914-6-GT Street Car Conversion Thread Mar 14 2014, 10:16 PM
biosurfer1 You've had THAT engine sitting in your garage ... Mar 14 2014, 10:27 PM speed metal army Nice stuff! I love new goodies. :) Mar 14 2014, 10:40 PM Qarl I almost forgot one of the added benefits of the n... Mar 14 2014, 10:55 PM
TJB/914
I almost forgot one of the added benefits of the ... Mar 15 2014, 10:40 AM
SirAndy
I almost forgot one of the added benefits of the ... Mar 29 2014, 03:00 PM Qarl
[quote name='Qarl' post='2011109' date='Mar 14 20... Mar 30 2014, 04:42 PM tdgray
I almost forgot one of the added benefits of the... Apr 15 2014, 07:11 AM rick 918-S Oh ya! You'll get a lot of volunteers when... Mar 14 2014, 11:30 PM CptTripps That's pretty great. I don't drink, but I... Mar 15 2014, 02:25 AM GeorgeRud Looks like you're ready for assembly. That ca... Mar 15 2014, 07:18 AM The Cabinetmaker I've followed this and your life with your son... Mar 15 2014, 07:57 AM Luke M Welcome back to the world Qarl.
:Qarl: Mar 15 2014, 10:10 AM Speedmster Karl, I'm glad to see your project has re-igni... Mar 15 2014, 10:29 AM Jeff Bowlsby :drooley: Get 'er done! Mar 15 2014, 10:36 AM wndsnd :popcorn: Mar 15 2014, 10:41 AM Ferg Wow, fun build. I had that exact motor that was s... Mar 15 2014, 11:21 AM mepstein Always liked this pic :Qarl: Mar 15 2014, 11:47 AM Qarl
Always liked this pic :Qarl:
Yep... that house... Mar 16 2014, 06:14 PM spare time toys As I was looking at the photos of parts all I coul... Mar 15 2014, 08:41 PM bcheney
As I was looking at the photos of parts all I cou... Mar 16 2014, 11:19 AM Mark Henry Nice! :Qarl: Mar 16 2014, 11:44 AM Montreal914 Beautiful project and nice setup! :beer1: Mar 16 2014, 12:00 PM Qarl Started cleaning up grinding the edges of the chas... Mar 16 2014, 06:05 PM Qarl Little notches I had to cut in Engman's long f... Mar 16 2014, 06:10 PM bulitt
Little notches I had to cut in Engman's long ... Mar 17 2014, 06:39 PM Andyrew Congrats on the renewed vigor and welcome back... Mar 16 2014, 06:23 PM Qarl
Congrats on the renewed vigor and welcome back... Mar 16 2014, 06:35 PM Andyrew If I remember correctly I've seen people make ... Mar 16 2014, 06:54 PM URY914 See if you can find a sheetmetal shop that has a p... Mar 16 2014, 07:20 PM Maltese Falcon Karl , I made your shipment today...track # on you... Mar 17 2014, 06:23 PM iamchappy Qarl is going to have a hard time with this boys, ... Mar 17 2014, 06:50 PM Qarl
Qarl is going to have a hard time with this boys,... Mar 28 2014, 04:18 PM Qarl I drilled the weld holes in the bases for the seat... Mar 28 2014, 09:29 PM URY914 Good to have you back. :beer2: Mar 29 2014, 06:00 AM rhodyguy rock on!!! :Qarl: :Qarl: . for new fo... Mar 29 2014, 09:28 AM Eric_Shea Q. Can you come install a bar in the shop please? Mar 29 2014, 10:33 AM Qarl
Q. Can you come install a bar in the shop please?... Mar 29 2014, 11:00 AM Qarl
Q. Can you come install a bar in the shop please?... Mar 29 2014, 02:32 PM Qarl
[quote name='Eric_Shea' post='2017694' date='Mar ... Mar 29 2014, 02:36 PM Downunderman Step drill. You can make them as big as you like.... Mar 29 2014, 12:25 PM Qarl
Step drill. You can make them as big as you like... Mar 29 2014, 02:31 PM iamchappy Qarl getting ready to consume :beer1: some Signa... Mar 29 2014, 12:35 PM CptTripps I've bought a lot of that stuff and never inst... Mar 31 2014, 04:36 AM Qarl Diversion today.
Had taken the Exige S out a few ... Apr 1 2014, 08:12 PM Qarl Media blasted some more parts before sending off t... Apr 13 2014, 02:55 PM 2mAn nice vans! haha Apr 13 2014, 10:53 PM Qarl
nice vans! haha
Yes, these are my garage sh... Apr 14 2014, 08:34 PM puffinator
nice vans! haha
Yes, these are my garage s... Apr 15 2014, 06:03 AM Qarl
Where did you get the carbon fiber engine shroud?... Apr 15 2014, 07:17 AM CptTripps
Yes, these are my garage shoes. My worn out pair... Apr 15 2014, 06:56 AM 2mAn
nice vans! haha
Yes, these are my garage s... Apr 15 2014, 11:33 AM tdgray
[quote name='Qarl' post='2024856' date='Apr 14 20... Apr 15 2014, 01:04 PM jfort glad to see you are back at, Karl. git'r done... Apr 14 2014, 02:37 PM Qarl
glad to see you are back at, Karl. git'r done... Apr 14 2014, 04:03 PM bcheney
glad to see you are back at, Karl. git'r don... Apr 14 2014, 06:25 PM Qarl
[quote name='Qarl' post='2024718' date='Apr 14 20... Apr 14 2014, 07:09 PM Qarl I fitted /prepped/trimmed the Engman kit.
1. Dri... Apr 14 2014, 07:47 PM ConeDodger Q, as your adviser on health issues, I find myself... Apr 14 2014, 04:22 PM tdgray Nice to see you still have a Lotus as well.
I... Apr 15 2014, 07:13 AM CptTripps
I have space issues at the moment.
Oh come on T... Apr 15 2014, 09:58 AM tdgray
I have space issues at the moment.
Oh come on ... Apr 15 2014, 01:06 PM Qarl
I've got five cars and a three car garage... ... Apr 15 2014, 01:30 PM Qarl Decided to "figure out" how to disassemb... Apr 17 2014, 09:08 PM JmuRiz
I've got five cars and a three car garage...... Apr 18 2014, 09:53 AM tdgray
[quote name='Qarl' post='2025129' date='Apr 15 20... Apr 18 2014, 10:35 AM Socalandy
Decided to "figure out" how to disassem... Apr 18 2014, 07:48 PM Qarl :Qarl:
http://www.914world.com/bbs2/uploads_offs... Apr 22 2014, 12:23 PM CptTripps Cool! You got a urinal for the car! Apr 22 2014, 06:42 PM Qarl Met with a potential new body/paint guy today. Di... May 3 2014, 09:17 PM bcheney
Met with a potential new body/paint guy today. D... May 3 2014, 09:20 PM Qarl Stripped some 1970 911 axles, that I scored from a... May 9 2014, 09:58 PM Qarl dupe May 9 2014, 09:59 PM Mike Bellis 40mm is not rare. It is 930 turbo. Easy to find.
... May 9 2014, 10:23 PM Qarl
40mm is not rare. It is 930 turbo. Easy to find.
... May 9 2014, 10:28 PM Qarl CV boot Flanges at Pacific Customs are also 6-bolt... May 9 2014, 10:35 PM Mike Bellis
CV boot Flanges at Pacific Customs are also 6-bol... May 9 2014, 10:40 PM Qarl I realize that... or I'd just buy one.
But it... May 9 2014, 10:42 PM Mike Bellis You could do one of these and weld up the unwanted... May 9 2014, 10:53 PM Qarl If I can't scrounge one up, I may have to. I... May 9 2014, 10:55 PM 914forme Since your having everything replated, I would mak... May 10 2014, 11:40 AM Qarl Rebuilt 2 of my 4 CV joints...
Anyone know what t... May 15 2014, 09:45 PM Qarl I just linked my original build thread at the begi... May 16 2014, 07:37 AM TJB/914
I just linked my original build thread at the beg... May 16 2014, 04:08 PM CptTripps
Whoooa, that was 11-years ago in 2003 so you get ... May 16 2014, 07:18 PM iamchappy Qarls not done yet so no clear winner... plus Volt... May 16 2014, 07:53 PM Bleyseng Qarl wins the trophy for longest project taken apa... May 17 2014, 05:01 AM Qarl
Qarl wins the trophy for longest project taken ap... May 17 2014, 09:29 AM mepstein Progress? Oct 8 2014, 06:37 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 01:31 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.