 914 B-pillars structual? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Han Solo |
 Jul 23 2014, 02:14 PM
Post
#1
|
|
Member  Group: Members Posts: 288 Joined: 30-September 13 From: Middle Tennessee Member No.: 16,456 Region Association: South East States  |
I'm looking at the SCCA Solo Prepared rules to see if I can get through testing and tuning without a roll bar or cage...
17.12 SAFETY A. Roll Bars/Roll Cages (Aluminum is not an allowed material.) 1. All open Prepared Category vehicles shall have at a minimum a roll bar complying with Appendix C. 2. It is recommended that all cars be equipped with a roll cage meeting the requirements of the Club Racing GCR. Compliance with this requirement supersedes the need to comply with Section 17.12.A.1. 3. Roll bars and cages may either be bolted or welded to the vehicle. The way I read it, I'll at least have to put the targa top on unless that sail is considered a roll bar. |
   |
 
|
Posts in this topic
Han Solo 914 B-pillars structual? Jul 23 2014, 02:14 PM
brant you want a cage for torsional rigidity and handlin... Jul 23 2014, 03:18 PM J P Stein The 914 cab be either an Open or Closed car. The r... Jul 23 2014, 08:43 PM Han Solo Thanks Brant and JP. For preliminary testing I... Jul 24 2014, 01:03 PM Joe Ricard Good luck, when I put slicks on my 914 even with ... Jul 25 2014, 10:59 AM
J P Stein
Good luck, when I put slicks on my 914 even with... Jul 25 2014, 08:21 PM Borderline About the single best thing I did for my car was t... Jul 26 2014, 07:40 AM Seabird The 914 with a roll cage (properly designed) and a... Jul 28 2014, 07:51 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 09:38 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.