![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
sfrenck |
![]()
Post
#1
|
Member ![]() ![]() Group: Members Posts: 492 Joined: 28-February 10 From: Wilmington, DE Member No.: 11,411 Region Association: MidAtlantic Region ![]() ![]() |
74 Djet system on a 2.0L engine. When I start the car "cold", I have to play with the gas pedal for 10-20 seconds to keep it from stalling. Once I've got it going, everything seems to work as it should (idle is high until the AAR closes) and it drives fine. When in the idle circuit, adjusting the bypass screw and/or the ECU mixture knob do have affect on the engine and I have them set to idle "correctly".
If I turn it off and try to restart it, it starts right up. If it has sat for a bit after driving, it is difficult to start (again, have to play with the gas pedal). Ideas? I thought initially it was my 3-port fuel pump (which is relocated to the front under the steering rack) but I prime the system by turning the key to the on position a couple times and it holds the fuel pressure at ~30 psi. One more thing - I had this setup in my old blue car and it didn't have this problem (switched the mechanicals to the new roller). Thanks in advance for any insight. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 8th July 2025 - 03:27 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |