 Tangerine oil pressure valve, am I missing something? new on won't go in all the way |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DRPHIL914 |
 Oct 11 2014, 08:00 AM
Post
#1
|
|
Dr. Phil  Group: Members Posts: 5,768 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
 |
So I pulled the cap for the oil pressure valve and a spring and small piston came out. The new one should just go right in ? Is there another piston up in there that didn't come out? Here is what I have .
Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
Philip W. Tangerine oil pressure valve Oct 11 2014, 08:00 AM
malcolm2 I'm sure Chris will chime in. I don't hav... Oct 11 2014, 08:30 AM
Philip W. Considering the plug had ti acres in and compre... Oct 11 2014, 08:51 AM malcolm2 does the screw on the side of the new device stay ... Oct 11 2014, 08:56 AM Philip W.
does the screw on the side of the new device stay... Oct 11 2014, 09:18 AM Racer Chris The lower area where the spring moves during engin... Oct 11 2014, 09:24 AM Philip W. Chris thanks for replying to my PM and also postin... Oct 11 2014, 10:16 AM Racer Chris I guess it's possible the factory tolerances o... Oct 11 2014, 11:12 AM Philip W. Finally got it tightened down enough to eliminate ... Oct 12 2014, 04:07 PM Philip W. Update- highway speed test for 30 minute drive eac... Oct 14 2014, 07:01 AM Johny Blackstain Sorry Phill, slight hijack. I'm curious if an... Oct 14 2014, 07:20 AM Racer Chris Al,
Those products only increase the pressure at w... Oct 14 2014, 08:45 AM Johny Blackstain
Al,
Those products only increase the pressure at ... Oct 14 2014, 08:58 AM Philip W.
Al,
Those products only increase the pressure at... Oct 14 2014, 12:55 PM Johny Blackstain There is a 4th Phill, however I've been inform... Oct 14 2014, 04:13 PM Dave_Darling
http://www.headflowmasters.com/vw-oil-pres...ml#.... Oct 15 2014, 01:49 PM Racer Chris
[quote name='Johny Blackstain' post='2097762' dat... Oct 15 2014, 02:43 PM Jake Raby And, someone failed to realize that there's at... Oct 14 2014, 04:43 PM billh1963
And, someone failed to realize that there's a... Oct 14 2014, 05:43 PM Jake Raby
And, someone failed to realize that there's ... Oct 14 2014, 11:05 PM boxsterfan :popcorn: Oct 15 2014, 02:32 AM majkos latest test,
an hr run time,
1200RPM Oct 26 2014, 12:41 PM majkos exhuast stuff is NOT hooked up yet. <_< Oct 26 2014, 12:42 PM Amphicar770 Old Post but figured I would add since I installed... Oct 22 2018, 03:23 PM ChrisFoley
I wanted to replace crush ring on big screw. Thus... Oct 23 2018, 05:33 AM Amphicar770 Thanks Chris.
So, in general, should these sort... Nov 2 2018, 08:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 12:10 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.