 Replacing the rear Targa seal, What do you do with the molded in metal plates? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jsaum |
 Nov 7 2014, 12:16 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 530 Joined: 12-June 07 From: Everett, WA Member No.: 7,809 Region Association: None  |
I bought the OEM improved rear Targa seal with the fuzzy strip in June and just now getting around to installing it. My question is what do you do with metal trim on the sides where the original has them molded in? My car is a 72 I'm guessing you'll need to fab up two metal strips. Has anyone done a write up on this? I did a search and checked the 914 rubber site but found nothing.
Thanks, Jsaum Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
jsaum Replacing the rear Targa seal Nov 7 2014, 12:16 PM
jsaum I'm thinking I'll cut them out here? Has a... Nov 7 2014, 12:20 PM
pneuhyde
I'm thinking I'll cut them out here? Has ... Nov 8 2014, 04:22 PM etcmss each one I have done had the side pieces that coul... Nov 7 2014, 01:48 PM JawjaPorsche I was able to cut out the metal bracket from origi... Nov 7 2014, 02:02 PM jsaum OK I'll try to take some pictures and post la... Nov 7 2014, 02:48 PM Mikey914 The OEM seal has a slit that allows the plate to b... Nov 8 2014, 11:22 AM steuspeed I pulled out the metal strip from the original. I ... Nov 8 2014, 05:14 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2025 - 08:26 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.