 so where is the leak?, Plus another question about the Flywheel. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| malcolm2 |
 Feb 6 2015, 05:52 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,747 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States 
 |
My Tranz is at Dr. Evil's and I wanted to see if I could find a small leak that I see is coming out at the btm of the tranz/engine joint. Seams to be a small weep notch there.
I figured I would see it, but I don't, everything is pretty dry. You can see the burnt seam goo I used from Type4 store.com. And the galley plugs are very clean. The cam plug is dry too. when I pulled the flywheel oil spilled out of the open part main seal, I fIgured that was normal, right? I see what probably is clutch dust on the upper vertical tin. Any ideas on the leak? Should I change the seal while I have all apart. It only has about 7000 miles on it.   So does that leave the tranz and the source? I did not look closely at it before I shipped it off. But it had a new seal in it too. Let me know if someone whats a close up picture of something. |
   |
 
|
Posts in this topic
malcolm2 so where is the leak? Feb 6 2015, 05:52 PM
r_towle If it's not the cam plug, I would change the R... Feb 6 2015, 06:57 PM Dave_Darling Gear oil smells much worse than engine oil. See i... Feb 6 2015, 09:16 PM malcolm2 just curious, anyone seen these BLACK spots on a 7... Feb 9 2015, 06:09 PM
stugray
just curious, anyone seen these BLACK spots on a ... Feb 11 2015, 01:39 PM malcolm2
Those look like rust spots from the rivets that ... Feb 11 2015, 02:08 PM r_towle It's measels, have you been vaccinated? Feb 9 2015, 06:27 PM rjames I don't see anything in the pic that looks lik... Feb 10 2015, 11:14 AM malcolm2
Re flywheel marks: What does the clutch disk loo... Feb 11 2015, 08:17 AM Steve Pratel If not the rear main seal or other parts, what abo... Feb 10 2015, 01:45 PM malcolm2
If not the rear main seal or other parts, what ab... Feb 10 2015, 02:19 PM Philip W. i went thru this last year and after rebuilding th... Feb 10 2015, 02:21 PM ndfrigi I just removed yesterday my pressure plate and dis... Feb 11 2015, 01:20 PM ndfrigi 71 1.7
Feb 11 2015, 01:22 PM 914Mels Look like hot spots to me, the metal actually gets... Feb 11 2015, 03:40 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 09:47 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.