 Clutch Failure, pedal to the floor! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mikedsilva |
 Apr 17 2015, 05:04 AM
Post
#1
|
|
Member  Group: Members Posts: 90 Joined: 23-February 15 From: Australia Member No.: 18,462 Region Association: Australia and New Zealand  |
I'm new to 914 and have no experience with gearboxes...
Tonight, my clutch failed.. the pedal went to the floor. The cable is fine (new)... But turns out that the "fork" the cable is connected to in the gearbox, seems to pivot back and forth freely. The clutch is still engaged but that fork piece doesn't appear to be attached to it. With the basic description I have given, any ideas what it is? Sounds like I will be doing my first gearbox removal... Here is a link to a short vid I just took... https://www.youtube.com/watch?v=F3sahANR2ow |
   |
 
|
Posts in this topic
mikedsilva Clutch Failure Apr 17 2015, 05:04 AM
pilothyer Sounds like the clutch cable tube (inside the tunn... Apr 17 2015, 06:49 AM edwin Mine had a sheared ball pivot in the bell housing ... Apr 17 2015, 06:53 AM
SirAndy Mine had a sheared ball pivot in the bell housing ... Apr 17 2015, 10:41 AM
Brian Mifsud
Mine had a sheared ball pivot in the bell housing... Apr 17 2015, 02:11 PM bandjoey :agree: easy to verify. Pull up the carpet, remove... Apr 17 2015, 09:44 AM The Cabinetmaker Before you go pulling the trans axle, there are a ... Apr 17 2015, 10:01 AM Dave_Darling :agree: with Curt (Cabinetmaker). Check the pedal... Apr 17 2015, 10:59 AM mikedsilva thanks for the replies but we have ascertained it ... Apr 17 2015, 12:54 PM cwpeden Make sure to clean the CV bolt heads well and get ... Apr 17 2015, 02:04 PM mikedsilva I updated the first post with a link to a short vi... Apr 17 2015, 03:28 PM SirAndy (i don't know how to embed)
It's in the FA... Apr 17 2015, 03:31 PM mikedsilva
[quote name='mikedsilva' post='2175502' date='Apr... Apr 17 2015, 07:40 PM euro911 Yep, you need to pull the transaxle. If you rig or... Apr 17 2015, 08:42 PM ThePaintedMan
Yep, you need to pull the transaxle. If you rig o... Apr 17 2015, 09:33 PM mikedsilva OK.
Got the trans out of the car easily enough... ... Apr 18 2015, 11:46 PM mikedsilva mb0njVcypMA Apr 18 2015, 11:50 PM ndfrigi wow that is a super clean transmission after dropp... Apr 19 2015, 12:02 AM euro911 What's the part # on the lever? Looks like it... Apr 19 2015, 12:28 AM mikedsilva
What's the part # on the lever? Looks like i... Apr 19 2015, 01:29 AM mikedsilva
What's the part # on the lever? Looks like i... Apr 19 2015, 01:29 AM Tbrown4x4 Looks like it might have been knocked out of place... Apr 19 2015, 01:24 AM mikedsilva googling that part number bring up NOTHING.... Apr 19 2015, 01:59 AM rmdinmd the PET say the part # should be 90111671200. Apr 19 2015, 05:22 AM Tbrown4x4 Soooooo.... What's the story?
New clutch? New... Apr 19 2015, 05:32 AM mikedsilva
Soooooo.... What's the story?
New clutch? Ne... Apr 19 2015, 12:58 PM JawjaPorsche Put out a Wtb in classifies.. Apr 19 2015, 05:47 AM Luke M I've got a clutch fork sitting around in a box... Apr 19 2015, 06:10 AM walterolin How about this: http://forums.pelicanparts.com/324... Apr 19 2015, 07:56 AM Mike Bellis Many of us have placed a washer under the ball stu... Apr 19 2015, 09:55 AM pilothyer Obtain the proper clutch fork and you'll be go... Apr 19 2015, 03:53 PM ThePaintedMan :agree: Definitely not the right fork, or it's... Apr 19 2015, 07:10 PM mikedsilva I borrowed a fork from a friend for comparison.. t... Apr 19 2015, 10:01 PM euro911 In doing a little more research, found a guy on eb... Apr 19 2015, 10:56 PM mikedsilva
In doing a little more research, found a guy on e... Apr 20 2015, 12:32 AM mikedsilva Test fit shows perfect fitment!
http://www.9... Apr 20 2015, 01:52 PM maf914 If the clutch fork issue has been solved, you won... Apr 20 2015, 01:58 PM mikedsilva
If the clutch fork issue has been solved, you won... Apr 20 2015, 02:37 PM euro911 Looks like you have the correct lever now :beer2:... Apr 20 2015, 05:05 PM mikedsilva
Looks like you have the correct lever now :beer2... Apr 20 2015, 06:52 PM pilothyer You should grease the needle bearing i and by all ... Apr 20 2015, 07:13 PM euro911 Good call Jerry.
Yes, the lock plate is the large... Apr 20 2015, 07:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th June 2024 - 02:43 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.