Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Injector #1 not firing, Is it the ECU
DavidSweden
post Jul 9 2015, 11:08 AM
Post #1


Member
**

Group: Members
Posts: 479
Joined: 8-June 14
From: Sweden
Member No.: 17,452
Region Association: Scandinavia



I am trying to figure out why my engine suddenly refused to start. This evening I was checking the injectors. I removed the injectors turned on the ignition and tested the spray pattern by opening/closing the throttle. The number #1 injector did not click /spay fuel, I took the connector for #2 and plugged it into #1 and it worked. I then removed the wiring harness from the ECU and checked for faults to ground and it seems good.

Can anyone explain why the injector does not work? I should also add that the car fires on the first start attempt runs for a couple of seconds and then refuses to start again. The plugs are dry on inspection, there is spark, timing is set and I have compression as well as fuel pressure. I have also replaced TS2 and have a rebuilt MPS.

Thanks
(IMG:style_emoticons/default/headbang.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 2nd June 2024 - 03:36 PM