 96mm pistons, installation |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DavidSweden |
 Jul 29 2015, 11:11 AM
Post
#1
|
|
Member  Group: Members Posts: 479 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia  |
I have some 96mm p&C from AA. The pistons are flat top with a cut out for high valve lift.
These pistons have no arrows on the tops (point to flywheel) although the ones in the picture do My question is this; When installing the piston the cutouts should be on the lower part of the cylinders the same side as the pushrods? If you understand what I mean. I guess this is a dumb question but I dont want to mess it up Thanks (IMG:http://www.914world.com/bbs2/uploads_offsite/i1300.photobucket.com-17452-1438189882.1.jpg) |
   |
 
|
Posts in this topic
DavidSweden 96mm pistons Jul 29 2015, 11:11 AM
Spoke I thought the arrows on the pistons should point t... Jul 29 2015, 11:33 AM
DavidSweden
I thought the arrows on the pistons should point ... Jul 29 2015, 11:43 AM
VWTortuga336
I have a set of these P/C at home. Consensus from... Jul 29 2015, 06:01 PM Valy If the pistons have po kets for the valves, their ... Jul 29 2015, 12:40 PM DavidSweden
If the pistons have po kets for the valves, their... Jul 29 2015, 01:08 PM Valy
If the pistons have po kets for the valves, thei... Jul 29 2015, 06:55 PM 914Sixer The piston on the far right has an arrow. Are you... Jul 29 2015, 02:29 PM DavidSweden
The piston on the far right has an arrow. Are yo... Jul 29 2015, 02:37 PM 914fahrer Hello ,look at this picture .
Gr... Jul 29 2015, 03:18 PM DavidSweden
Hello ,look at this picture .
G... Jul 29 2015, 04:02 PM McMark Pockets go on the bottom. Pistons only have arrows... Jul 30 2015, 12:17 AM DavidSweden
Pockets go on the bottom. Pistons only have arrow... Jul 30 2015, 12:31 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 06:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.