 Best Paint Stripping Method?, ::: In the Garage ::: |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| CptTripps |
 Mar 12 2005, 08:54 AM
Post
#1
|
|
:: Punch and Pie ::  Group: Members Posts: 3,584 Joined: 26-December 04 From: Mentor, OH Member No.: 3,342 Region Association: Upper MidWest  |
I've searched and can only find 'Media Blasting Vs. Acid Dip' threads, so I'm hoping to get some feedback on 'Garage Stripping' methods. For those of us taking the car down to bare metal, and re-painting it in the garage/driveway/basement (long story) is there a 'best way' to get it all off before filler/primer?
I used one of those spongy wheel things attached to a drill last night on the pass-front fender and it took about an hour. I CAN'T think of doing the entire car like that. I'm not looking to punk-out on the time thing, but It'd take me a few weeks of evenings to do it with the wheel thingy. Should I go get a bunch of 60-Grit sand disks and go at it on the grinder at a low speed? That seemed awefull abrasive. Is chemical stripping better? I tried some Jasco that I had left over from another job and it curtled the re-spray off pretty quick, but didn't seem to phase the second coat. For the trunks, I'm just going to rough it up and prime/paint. But the rest of the body needs to come down to the shiney stuff. Ideas/Suggestions/Stories of Peril and Dispair? |
   |
 
|
Posts in this topic
CptTripps Best Paint Stripping Method? Mar 12 2005, 08:54 AM
rick 918-S Small propane torch and a scraper, heat gun and a ... Mar 12 2005, 09:09 AM xsboost90 there is another thread on this but mar hyde tal s... Mar 12 2005, 09:09 AM 914GT Doug, here is a good stripping method. Mar 12 2005, 09:18 AM rick 918-S I owned a shop for 20 years. I had my employees st... Mar 12 2005, 09:29 AM scotty b To strip in the garage,I would use a chemical stri... Mar 12 2005, 09:30 AM Flat VW There was a thread here recently about "soda blast... Mar 12 2005, 09:40 AM CptTripps So I'm gathering that it's all personal pr... Mar 12 2005, 09:46 AM scotty b http://www.914world.com/bbs2/h... Mar 12 2005, 09:52 AM jim912928 a resto body shop that did mine had the car totall... Mar 12 2005, 10:00 AM rezron I've done alot of complete strips and repaint... Mar 12 2005, 10:41 AM xsboost90 ok, i see the torch method now...hm. I have used c... Mar 12 2005, 02:46 PM kwales I like air powered dual action sanders.
Only car ... Mar 12 2005, 04:41 PM CptTripps Here's what I did....
7" 50-grit on a DA sand... Mar 13 2005, 11:23 PM CptTripps Found the part to upload pics!
Here's a s... Mar 14 2005, 07:50 AM CptTripps And from up front. The garage is getting cramped w... Mar 14 2005, 07:52 AM type11969 I use a wire cup brush on a grinder, takes paint a... Mar 14 2005, 07:55 AM balljoint http://www.914world.com/bbs2/h... Mar 14 2005, 11:53 AM Gint I should have posted this before. It's in my ... Mar 14 2005, 12:04 PM scotty b Mar 14 2005, 12:59 PM Travis Neff Hey Gint, did you hook those 3m pads on a grinder ... Mar 14 2005, 01:01 PM CptTripps Where can I buy a bunch of those? Looks like Gint ... Mar 14 2005, 01:03 PM 9146986 Doug, you are going to have fun sanding down all t... Mar 14 2005, 01:59 PM CptTripps   |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 12:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |