 moving/adjusting the windows, need to eliminate gaps |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914 RZ-1 |
 Jan 15 2016, 09:47 PM
Post
#1
|
|
Porsche Padawan  Group: Members Posts: 683 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California  |
I need to adjust the fore/aft position of my driver's side window. The car is a 72 but the door is a later one, as shown in the picture.
Do I/can I move the window forward? I'm thinking I need to take it out of the lift bracket and re-position it. Is there another way? I can't close the window all the way or it hits the roof. I can tell that it just needs to be pushed forward a bit. I tried tapping it with a rubber hammer to no avail. I loosened some bolts as well to see if that helped, to no avail. The Haynes manual was not much help. Any suggestions? Attached image(s) 
|
   |
 
|
Posts in this topic
914 RZ-1 moving/adjusting the windows Jan 15 2016, 09:47 PM
era vulgaris Judging by your picture #2, your B-post is positio... Jan 16 2016, 08:02 AM r_towle The bolts that attach the glass to the mechanism c... Jan 16 2016, 10:11 AM rgalla9146 Do I see a stainless guide on the front edge of yo... Jan 16 2016, 12:44 PM
914 RZ-1 So I consulted a friend and fellow 914er and he su... Jan 19 2016, 10:42 PM rgalla9146
So I consulted a friend and fellow 914er and he s... Jan 20 2016, 09:02 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 03:57 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.