 Speedo angle drive problem |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jameel |
 Apr 10 2016, 04:49 PM
Post
#1
|
|
Member  Group: Members Posts: 98 Joined: 6-October 15 From: Iowa Member No.: 19,239 Region Association: None  |
I'm having trouble getting this guy installed. It goes in fine, then when I tighten it up the shaft tightens up and won't turn (I'm turning the small gear inside the end of the tail cone) I did some careful measuring and I think the end of the slotted member in the angle drive is pressing against the shoulder of the paddle inside the tail cone piece. When testing the rotation of the angle drive itself I press down lightly on the arrowed surface and the drive won't turn, so I know it doesn't take much pressure here to prevent (what I assume are) the miter gears from turning.
The Haynes manual shows a whole grouping of parts as one number (frustrating!) Anybody know what A and B are? I'm thinking B is the seal, but what is A? I think a washer in here somewhere would provide a bit of clearance so things can move properly. Any ideas?   |
   |
 
|
Posts in this topic
Jameel Speedo angle drive problem Apr 10 2016, 04:49 PM
mobymutt I installed mine as one piece, per the manual.
Pe... Apr 10 2016, 06:24 PM Mikey914 We provide with the double seal housing. We do not... Apr 10 2016, 11:47 PM Darren C Both parts available from Porsche main dealers and... Apr 11 2016, 05:39 AM
Mikey914
Both parts available from Porsche main dealers an... Apr 11 2016, 12:45 PM Jameel Thanks! You guys helped me figure it out. Yest... Apr 11 2016, 07:07 AM Dave_Darling Yes, for something with "PORSCHE" on the... Apr 11 2016, 09:08 PM Darren C $7 & $10 is VERY cheap for genuine P... Apr 12 2016, 12:26 AM Mikey914 Actually, they do seal the internal, but most of t... Apr 12 2016, 12:41 AM porschetub
Actually, they do seal the internal, but most of ... Apr 12 2016, 01:40 AM Mikey914 The internal drive or the entire unit?
I assume th... Apr 12 2016, 01:59 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 01:15 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.