 Gear Shift Rod Coupling |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| FlatSix |
 Jul 13 2016, 07:26 AM
Post
#1
|
|
English Member  Group: Members Posts: 191 Joined: 14-January 03 From: Poole, England Member No.: 144  |
I found I couldn't select the gears as normal today. Upon investigation I found that the coupling bushing where the two rods connect, just to the rear of the firewall, had totally disintegrated.
I've still to order the replacement bushings, but looking at the rod coupling do I need to remove this pin or do the new bushings simply push on? Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
FlatSix Gear Shift Rod Coupling Jul 13 2016, 07:26 AM
BeatNavy Yes, that pin needs to be removed. It was quite a... Jul 13 2016, 07:44 AM maf914 This is a typical failure on old original shift ro... Jul 13 2016, 07:45 AM FlatSix Thanks guys for your responses. This gave me the c... Jul 13 2016, 09:02 AM Amphicar770 I removed / installed mine with harbor freight pre... Jul 13 2016, 09:13 AM Perry Kiehl Clone I have the correct bushings on hand if you need so... Jul 13 2016, 12:51 PM NeunEinVier If you buy new OEM bushings from the dealer they... Jul 14 2016, 10:33 AM Dave_Darling I believe there is enough slop in the non-slotted ... Jul 14 2016, 05:20 PM The Cabinetmaker I believe the bushings with the oval hole is for a... Jul 14 2016, 05:45 PM colingreene I used 911 bushings on bruces advice because the 9... Jul 14 2016, 11:13 PM
bdstone914
I used 911 bushings on bruces advice because the ... Jul 15 2016, 06:13 AM Mikey914 Just did this myself, hammer will not work. You ne... Jul 15 2016, 08:53 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 08:42 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.