 Anyone built their own wiring harness?, My '75 2.0 has a trashed harness |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| aggiezig |
 Jul 20 2016, 12:14 PM
Post
#1
|
|
Porsche Wannabe  Group: Members Posts: 319 Joined: 13-January 16 From: Los Angeles, CA Member No.: 19,557 Region Association: Southern California 
 |
Hey everyone. New to 914's but not new to wiring harness(es). Curious if anyone out there has built their own harness?
Options for replacement right now look like either:
But, I'm curious if anyone has ever taken the current flow diagrams or schematics and "made their own" harness? My current project has 65-70% of the original wiring in it, but has been trashed from rodents and the P/O cut the harness after the firewall. I'm contemplating "rebuilding" the harness using what I have in the car and a wiring diagram as a template. Meaning, I'd label each wire, pull it all out, and build a new harness side-by-side with the old and diagrams as a guide. Surely, I could do this for less in materials (obviously not counting my labor) than a new $2k+ complete harness? |
   |
 
|
Posts in this topic
aggiezig Anyone built their own wiring harness? Jul 20 2016, 12:14 PM
JOEPROPER JEFF BOWLSBY... is the wire harness guy here. Che... Jul 20 2016, 12:20 PM
Tom_T
JEFF BOWLSBY... is the wire harness guy here. Ch... Jul 20 2016, 12:57 PM
JawjaPorsche
JEFF BOWLSBY... is the wire harness guy here. Ch... Jul 20 2016, 04:03 PM orbit398
Hey everyone. New to 914's but not new to wir... Jul 20 2016, 12:23 PM Mueller Yep, done it a few times, stock injection and with... Jul 20 2016, 12:30 PM stugray I have a mostly complete harness that was removed ... Jul 20 2016, 12:38 PM mepstein Buy someone's used harness. If you place a WTB... Jul 20 2016, 01:08 PM oldie914 Many years ago, I spliced a rear wiring harness in... Jul 20 2016, 01:41 PM BeemerSteve I recently contacted Jeff about a replacement harn... Jul 20 2016, 07:09 PM Mueller
I recently contacted Jeff about a replacement har... Jul 20 2016, 07:14 PM BeemerSteve
I recently contacted Jeff about a replacement ha... Jul 20 2016, 07:19 PM Jeff Bowlsby Reports of my death are greatly exaggerated!
... Jul 20 2016, 08:55 PM Jeff Hail
Reports of my death are greatly exaggerated!
... Jul 20 2016, 11:13 PM Jeff Bowlsby
Were on to you. Please stop impersonating the ar... Jul 21 2016, 09:03 AM ClayPerrine I took the stock 73 four cylinder harness and did ... Jul 20 2016, 08:19 PM 914Sixer I can't remember the name but some one in Holl... Jul 20 2016, 08:22 PM Amphicar770 Glad to hear that the rumors of Jeff no longer pro... Jul 20 2016, 08:30 PM BeemerSteve I did say a complete harness....but should've ... Jul 20 2016, 09:14 PM aggiezig Wow - lots of replies and lots of great informatio... Jul 20 2016, 10:34 PM larss The header of this thread is "Anyone built th... Jul 21 2016, 08:37 AM Frankvw Hi Lars S, nice work, looks like a fun project. Ho... Jul 21 2016, 08:54 AM larss
Hi Lars S, nice work, looks like a fun project. H... Jul 21 2016, 09:11 AM barefoot
Hey everyone. New to 914's but not new to wir... Jul 21 2016, 02:07 PM aggiezig
Put WTB add in here, surely somme good ones out t... Jul 21 2016, 02:10 PM Mark Henry One thing I'll add about harnesses is that I... Jul 21 2016, 02:18 PM aggiezig
One thing I'll add about harnesses is that I... Jul 21 2016, 02:21 PM Jeff Bowlsby Here is a chart of the differences between model y... Jul 21 2016, 11:45 PM aggiezig Just thought I'd post some pics of my rat... Jul 22 2016, 07:57 PM aggiezig Also, thought I'd post these for anyone who mi... Jul 22 2016, 10:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 13th July 2025 - 08:02 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.