 3.2 conversion wiring, Maybe someone can tell me what these are before I hunt them down |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914dave |
 Nov 23 2016, 05:30 AM
Post
#1
|
|
914 Addict  Group: Members Posts: 703 Joined: 19-October 03 From: Willow Grove Pa. Member No.: 1,262 Region Association: North East States 
 |
This is a section of the DME harness from my 1987 3.2. Pictured are
1) 6 pin connector that plugs into the sub harness for alt/starter/reverse light 2) O2 sensor 3) a rubber relay socket 4) a single black and a single green wire with eyelet terminals I'm assuming that the O2 sensor and the other wire go thru the sheet metal to the exhaust area. I don't know what the green and black wires go to. The relay socket is easy. Do you guys know before I have to hunt it down. I haven't been able to find a good harness diagram that has good enough resolution to print out. Thanks Dave  |
   |
 
|
Posts in this topic
914dave 3.2 conversion wiring Nov 23 2016, 05:30 AM
jim912928 Here is the link on how I wired up my 3.2L convers... Nov 23 2016, 06:56 AM
914dave
Here is the link on how I wired up my 3.2L conver... Nov 23 2016, 07:44 AM mepstein Are the green and black wires for the coil? Nov 23 2016, 07:55 AM 914dave
Are the green and black wires for the coil?
M... Nov 23 2016, 08:12 AM mepstein
Are the green and black wires for the coil?
... Nov 23 2016, 10:16 AM 914dave
[quote name='914dave' post='2426193' date='Nov 23... Nov 23 2016, 11:41 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 02:09 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.