 Air sealing the roof |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| db9146 |
 Mar 10 2017, 12:20 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 953 Joined: 21-December 04 From: Atlanta, GA Member No.: 3,315 Region Association: None 
 |
I replaced the seal around the back of the roof several months ago. However, there is now a slight gap in the middle where the seal is about 1/8" off the targa, leading to wind and engine noise. I have tried putting the roof out in the sun, supporting the edges and then placing some weight in the middle along the back edge but it really hasn't seemed to help much.
Short of adding material under the rubber seal in the middle and tapering it to either side, are there other options I should try? I have checked with an early roof (the stock one) and a later model roof but no effect. |
   |
 
|
Posts in this topic
db9146 Air sealing the roof Mar 10 2017, 12:20 PM
Mikey914 Curious, is the replacement the one with the fuzze... Mar 10 2017, 12:23 PM db9146 Mark,
Without.
Dee Mar 12 2017, 05:26 PM r_towle Try adding a small piece of rubber tubing to each ... Mar 12 2017, 06:51 PM Perry Kiehl I'd be curious if this is a factory seal, repr... Mar 13 2017, 07:43 AM r_towle also, there seems to be early and late roofs.
The ... Mar 13 2017, 10:47 AM
dgraves
I replaced the seal around the back of the roof s... Mar 13 2017, 11:23 AM porschetub
I replaced the seal around the back of the roof ... Mar 13 2017, 12:18 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th June 2024 - 11:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.