 Advice needed -Difficult to get into 1st/reverse, As a result of adding the left side under warm air guide,- |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DRPHIL914 |
 Sep 13 2017, 03:44 PM
Post
#1
|
|
Dr. Phil  Group: Members Posts: 5,769 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
 |
so figuring that i should put this missing piece on to help cooling of underside heads(this is what ive been told anyway),
i put the piece on and didnt think there would be a problem. car was in neutral when installing it and all went very smoothly all the holes lined up, Very hard to get it into 1st or reverse now- i will qualify this by adding that i have converted the exhause to a early Sshe's with triad- its a 2.0 75 car but all the exhaust etc is backdated so to speak- i may take this off when i get to Helen if it can't be rectified more easily- Thoughts? Anyone else ever run into this? Attached thumbnail(s) 
|
   |
 
|
Posts in this topic
Philip W. Advice needed -Difficult to get into 1st/reverse Sep 13 2017, 03:44 PM
r_towle Firewall bushing, shifter console bushing, or bent... Sep 13 2017, 04:16 PM Philip W. Rich,
i did replace all bushings 2 years ago i sh... Sep 13 2017, 05:21 PM JOEPROPER I ran into this when I installed the SSI Heat exch... Sep 13 2017, 05:40 PM r_towle See if you can get someone to shift it while you w... Sep 13 2017, 05:49 PM rhodyguy That's the wrong one. It's For a tailshift... Sep 13 2017, 05:52 PM
Philip W.
That's the wrong one. It's For a tailshif... Sep 13 2017, 06:04 PM Philip W.
That's the wrong one. It's For a tailshif... Sep 13 2017, 05:55 PM 76-914 Must be Kevin. It sits very close to the rod. Sep 13 2017, 05:56 PM rhodyguy Check your pms Phil. Sep 13 2017, 06:05 PM ndfrigi RE: Advice needed -Difficult to get into 1st/reverse Sep 13 2017, 07:04 PM Philip W.
ok , so this makes sense- the other way and it ... Sep 13 2017, 07:36 PM bulitt Easiest way to adjust the shifter- see post 2
htt... Sep 14 2017, 03:44 AM rhodyguy When trying to engage 1/r, the rod rotates down an... Sep 14 2017, 05:27 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 03:21 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.