 Just a little bit of progress, learned something along the way |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Doug Leggins |
 May 25 2005, 09:14 PM
Post
#1
|
|
Senior Member  Group: Benefactors Posts: 1,358 Joined: 6-February 03 From: Nashville, Indiana Member No.: 261 Region Association: None 
  |
I installed the trim and seals around the windshield frame last Sunday.
As I took apart the 72 parts car to help determine how to, and the best sequence to install the parts on the 73, I discovered a black painted area on the A-pillar that I had never noticed before. (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) Attached image(s) 
|
   |
 
|
Posts in this topic
Doug Leggins Just a little bit of progress May 25 2005, 09:14 PM
Doug Leggins Took a look at the parts for a minute and realized... May 25 2005, 09:17 PM Doug Leggins And then the black stripe May 25 2005, 09:18 PM Doug Leggins I used a little of the black butyl tape that is us... May 25 2005, 09:26 PM Doug Leggins I had a bit too much in a couple of areas. If i ha... May 25 2005, 09:28 PM Doug Leggins Here's the finished driver's side. Orange ... May 25 2005, 09:31 PM Doug Leggins pass side.
I installed the seal into the back sid... May 25 2005, 09:35 PM Doug Leggins forgot the pic showing where I used a screwdriver ... May 25 2005, 09:37 PM Gint Thanks Doug! I never realized that. I'll... May 25 2005, 09:40 PM
Doug Leggins Here is the sequence that I used to get all of the... May 25 2005, 09:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 04:30 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.