 Cylinder head temperature gauge install, where to get and how to install - should do this while motor is out and tin is off |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DRPHIL914 |
 Mar 9 2018, 12:41 PM
Post
#1
|
|
Dr. Phil  Group: Members Posts: 5,768 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
 |
Being a 2.0 late car and having a tendency to run on the hot side and living in a hot climate, I think I should consider a cylinder head temp gauge. I have not seen one installed and would like to know how to proceed.
Now since putting the backdated HE on and the aux oil cooler oil temps have never been over 225/230 at the hardest running in the mountains on sustained up hill climbs. And I will finally have everything cleaned off properly and the tins all removed from the motor , under side cleaned up and have new warm air guides that were not on the car before, which should help as well. Either way seems like a good time to do this. advice on installation, wiring etc Thanks, Phil |
   |
 
|
Posts in this topic
Philip W. Cylinder head temperature gauge install Mar 9 2018, 12:41 PM
mgphoto The sensor end fits around the spark plug, like th... Mar 9 2018, 02:21 PM Philip W. so i found a site that says VDO discontinued makin... Mar 9 2018, 03:19 PM Rand I see Summit Racing (where I always bought my VDO ... Mar 9 2018, 03:50 PM Mblizzard I would recommend the Dakota digital version. The... Mar 9 2018, 05:48 PM
Porschef
I would recommend the Dakota digital version. Th... Mar 10 2018, 07:21 AM Montreal914 http://www.914world.com/bbs2/index.php?sho...=3232... Mar 9 2018, 10:09 PM Philip W. good information-
one issue has been brought up a... Mar 9 2018, 10:15 PM Olympic 914 Also running the Dakota Digital CHT gauge. You wi... Mar 10 2018, 07:36 AM barefoot I acquired a used center console that contained 2 ... Mar 10 2018, 08:03 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th June 2024 - 08:01 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.