 Rear Suspension Shock Nut Tightening, How to get a torque wrench on this nut |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Highland |
 Mar 26 2019, 09:29 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 513 Joined: 8-August 11 From: San Diego, CA Member No.: 13,418 Region Association: Southern California  |
So I can't figure out how to get a 27mm socket/torque wrench on this nut. The brake shield fastening feature is in the way with only 2" of clearance.
Do I have to cut the socket to fit or is there one I can purchase? Or does one just use an open ended wrench and approximate the torque?  |
   |
 
|
Posts in this topic
Highland Rear Suspension Shock Nut Tightening Mar 26 2019, 09:29 PM
Dave_Darling Approximate it.
--DD Mar 26 2019, 09:37 PM
wndsrfr If I recall correctly you have to do it at ride he... Mar 27 2019, 06:04 AM
mepstein
If I recall correctly you have to do it at ride h... Mar 27 2019, 07:09 AM Rand
Approximate it.
--DD
Bingo. Get used to what th... Mar 28 2019, 03:20 PM Chi-town You can buy a 1/2" drive crows foot that will... Mar 26 2019, 10:33 PM Olympic 914
You can buy a 1/2" drive crows foot that wil... Mar 27 2019, 06:50 AM 90quattrocoupe If you are going to use a crows foot, use a flare ... Mar 28 2019, 12:39 PM mlindner Just use a box wrench. Even a standard will work. Mar 28 2019, 02:12 PM Mark Henry Two of the most important tools I own is my finely... Mar 28 2019, 02:31 PM Rand
Two of the most important tools I own is my finel... Mar 28 2019, 03:22 PM mb911 I use blue 242 loctite and just tighten with a wre... Mar 28 2019, 04:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 07:03 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.