 Valve Adjustment Question, How tight can you go on the valves for a 2.0? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dbreitkreutz |
 Apr 10 2019, 04:07 PM
Post
#1
|
|
Newbie  Group: Members Posts: 7 Joined: 20-February 11 From: Deer Park, WA. Member No.: 12,737 Region Association: Pacific Northwest  |
Hello,
I have a 74 with a 2.0 + with solid lifters (SCAT cam and lifters), Weber IDF 44s, open header (no heat exchangers) and Bursch exhaust. It runs cool as I have a deep sump pan bringing the oil up to 5 qts. Right now I adjust both exhaust and intake to .006 in. The valves are noisy. So the question is how tight can I go without burning the valves?? |
   |
 
|
Posts in this topic
dbreitkreutz Valve Adjustment Question Apr 10 2019, 04:07 PM
MarkV I wouldn't go any tighter than .06.
You coul... Apr 10 2019, 04:15 PM dr914@autoatlanta.com 6 intake 8 exhaust, do NOT go any tighter!... Apr 10 2019, 04:20 PM Superhawk996 Valve clatter is a sign of air cooled character. ... Apr 10 2019, 04:25 PM Mark Henry With steel push rods you can run zero lash, differ... Apr 10 2019, 04:46 PM porschetub Clearances are the way they are to allow for engin... Apr 10 2019, 06:41 PM Carl La Fong My friend has a 2.2 type four with steel push rods... Apr 10 2019, 08:16 PM
Mark Henry
My friend has a 2.2 type four with steel push rod... Apr 11 2019, 06:55 AM VaccaRabite
My friend has a 2.2 type four with steel push ro... Apr 11 2019, 07:59 AM Carl La Fong
My friend has a 2.2 type four with steel push ro... Apr 11 2019, 04:26 PM worn
[quote name='Mark Henry' post='2704288' date='Apr... Apr 11 2019, 06:54 PM dbreitkreutz
Hello,
I have a 74 with a 2.0 + with solid lifter... Apr 11 2019, 11:25 AM Mark Henry Jake dropped a ceramic lifter and it shattered lik... Apr 11 2019, 07:01 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 01:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.