 Melted fuse - not blown, Resistance at fuse box? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| FlacaProductions |
 Oct 24 2019, 04:52 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,964 Joined: 24-November 17 From: LA Member No.: 21,628 Region Association: Southern California 
 |
Greetings all,
Please excuse the first of what will probably be a small stream of posts as I'm finally with the 914 for a few days so I'm working through a few things. First item: I changed out the bulbs in my pilot driving lights that are in the stock positions - put there by a PO or probably Brad Mayeur. I changed them to standard H3 55w lamps but went to a little more blue color to match the LED headlights I have installed along with the spoke works relay to deal with rapid flash and other side effects of the LEDs. The fog light fuse - 3rd from the right - gets pretty hot and will eventually melt but does not blow. Could it be as simple as high resistance at the fuse location in the fuse box? It appears - through trouble shooting - that it only happens when the drivers fog light is installed. if it's not and only the passenger lamp is installed, no issue. Different lamps show the same behavior. Thanks for the input! |
   |
 
|
Posts in this topic
FlacaProductions Melted fuse - not blown Oct 24 2019, 04:52 PM
Spoke Try cleaning the fuse ends and the tabs of the fus... Oct 24 2019, 07:26 PM FlacaProductions Job number one tomorrow. They look really good bu... Oct 24 2019, 07:38 PM falcor75 Are the pilot lights rated for 55W? The stock fogl... Oct 24 2019, 09:24 PM
ClayPerrine
Are the pilot lights rated for 55W? The stock fog... Oct 25 2019, 07:13 AM FlacaProductions This car is new to me since march and came with th... Oct 25 2019, 07:24 AM petza914 Deoxit D5 is much better than regular contact clea... Oct 25 2019, 08:13 AM Spoke Here's the basic circuit for the 914 low/high ... Oct 25 2019, 08:45 AM FlacaProductions Well - I checked the old tungsten lamps and they a... Oct 25 2019, 09:16 AM FlacaProductions Update - the issue seems to have been dealt with b... Oct 31 2019, 09:35 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 04:14 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.