 What Goes Between Rear Main Seal and Flywheel?, Felt Washer and Sealing Ring Locations |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| motorvated |
 Feb 16 2020, 07:30 PM
Post
#1
|
|
Member  Group: Members Posts: 281 Joined: 13-February 13 From: Colorado Member No.: 15,519 Region Association: Rocky Mountains  |
My engine came with the flywheel detached so I'm not sure what goes where. Haynes manual mentions a felt washer and the exploded view from Autoatlanta shows two "sealing rings". My flywheel has a pilot bearing and my gasket kit has a new plate that goes on the outboard side of the flywheel under the five bolts. After installing the correct crankshaft shims and the new rear main seal, what goes between it and the flywheel and how do they fit? If the felt washer is one of the two "sealing rings" depicted in the exploded view, where/how is it fitted and is it saturated with oil first or left dry. Is the other "sealing ring" an o-ring and where/how is it fitted. Thanks.
|
   |
 
|
Posts in this topic
motorvated What Goes Between Rear Main Seal and Flywheel? Feb 16 2020, 07:30 PM
motorvated
My engine came with the flywheel detached so I... Feb 17 2020, 02:11 PM ndfrigi This might help you.
http://www.914world.com/bbs... Feb 17 2020, 02:27 PM davep Um, NO. The felt washer is supposed to retain oil ... Feb 18 2020, 09:13 PM
motorvated
Um, NO. The felt washer is supposed to retain oil... Feb 19 2020, 07:32 AM Mark Henry Use grease on the pilot bearing, just a small dab.... Feb 19 2020, 08:50 AM dr914@autoatlanta.com rear main, flywheel o ring, needle bearing, felt w... Feb 19 2020, 11:03 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 08:39 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.