 Puttin in a 6, ??? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Markeydoo |
 Jul 5 2005, 08:59 PM
Post
#1
|
|
???  Group: Members Posts: 246 Joined: 10-April 03 From: Socal Ventura Member No.: 557 Region Association: None  |
OK I am about to put in a 6. I am going to use the quick 6 motor mount and a side shift tranny. Has any 1 used the Quick 6 mount and what modifications did you need to make if any. Also the car is a 75 and I was also wondering if I need to change out the relay board in the engine compartment. I am using the stock engine wire harness from a 914-6
Thanks Mark |
   |
 
|
Posts in this topic
Markeydoo Puttin in a 6 Jul 5 2005, 08:59 PM
Steve I used the quick six with my first six motor.
A co... Jul 5 2005, 11:06 PM trekkor You shall say...SIX!
The Quick SIX bar works ... Jul 5 2005, 11:38 PM goose2 Mark...the mounts I sent you will work..they came ... Jul 6 2005, 12:38 AM Markeydoo Thanks All
I can't wait to start Removing and ... Jul 6 2005, 08:17 PM Markeydoo Trekor
GREAT post. It will help alot. So you start... Jul 6 2005, 09:05 PM
trekkor I highly recommend test running the motor if you ... Jul 6 2005, 09:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 09:47 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.