 74 1.8 Throttle position switch, at rest: contacting or not contacting? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| CoronaMike |
 Jul 24 2020, 08:36 PM
Post
#1
|
|
Member  Group: Members Posts: 152 Joined: 11-February 19 From: Maryville, TN Member No.: 22,868 Region Association: South East States  |
Hey peeps,
So, I'm going through my fuel injection system section by section and I'm at the throttle position switch. I took out the throttle body, then took of the black plastic cap and I'm looking at the switch here. It starts out touching the contact on the right, then as I move the throttle spring, it goes past the center where it's not contacting anything - then eventually hits the contact on the left. I checked the ohm meter and it starts out at OL then when I get to the other contact it's at 0 (so from what I understand - that's correct). I'm just wondering if when it's disconnected like this - is it supposed to be touching the contact on the right side? Or is it supposed to be positioned in the center (not touching either side)? Video Below: https://www.youtube.com/watch?v=Tf0eabIcO1Y |
   |
 
|
Posts in this topic
CoronaMike 74 1.8 Throttle position switch Jul 24 2020, 08:36 PM
JeffBowlsby This any help? Jul 25 2020, 08:44 AM CoronaMike
This any help?
I had seen this, but I think thi... Jul 25 2020, 09:59 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 03:15 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.