 914/6 Front sway bars |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| silverg |
 Nov 6 2020, 12:07 PM
Post
#1
|
|
914s since March 1970  Group: Members Posts: 54 Joined: 7-June 06 From: Winchester, VA Member No.: 6,179 Region Association: MidAtlantic Region 
 |
Did 914/6s come with sway bars or at least a triangular boss on the inner wheel well?
|
   |
 
|
Posts in this topic
silverg 914/6 Front sway bars Nov 6 2020, 12:07 PM
rgalla9146 neither Nov 6 2020, 12:21 PM bdstone914
Did 914/6s come with sway bars or at least a tria... Nov 6 2020, 12:24 PM SKL1 I believe all 914's had the triangular boss on... Nov 6 2020, 12:43 PM 914Sixer All cars have the boss in place in the front. Rea... Nov 6 2020, 12:56 PM silverg what does it mean if a 1970 mid-run 914/6 does not... Nov 6 2020, 01:10 PM
mepstein
what does it mean if a 1970 mid-run 914/6 does no... Nov 6 2020, 02:25 PM gandalf_025 All Aftermarket rear bars did not require welding.... Nov 6 2020, 01:46 PM Eric_Shea No bars came on -6's Nov 6 2020, 03:55 PM rgalla9146
No bars came on -6's
Thank you Eric.
I... Nov 6 2020, 04:39 PM dr914@autoatlanta.com The 70 and 71 sixes did not have sway bars. 1972 ... Nov 6 2020, 05:30 PM fixer34 I'll enter the fray.. Pictures are of my fact... Nov 6 2020, 07:59 PM dr914@autoatlanta.com except for the link 911 sway bars were the same. ... Nov 7 2020, 05:27 PM fixer34
except for the link 911 sway bars were the same. ... Nov 9 2020, 06:13 PM silverg I still don't know what to make of a mid-run 1... Nov 6 2020, 08:44 PM 914werke a-arms were intermixed throughout the years sway ... Nov 6 2020, 09:15 PM burton73 Number 41 clear clean picture of early 6
Bob B Nov 7 2020, 03:56 PM rgalla9146 Keep in mind 914 6s were not for everyone.
T... Nov 8 2020, 06:31 AM Al Meredith I just got The new 914 book on restoration from Ge... Nov 8 2020, 11:21 AM SKL1 Yes it is- got my signed copy as a contributor... Nov 8 2020, 10:16 PM rgalla9146 No disassembly required, the diameter of our front... Nov 9 2020, 08:08 PM mepstein
No disassembly required, the diameter of our fron... Nov 9 2020, 09:25 PM rgalla9146
No disassembly required, the diameter of our fro... Nov 9 2020, 10:25 PM SKL1 See the dry ice thread here- the 914-6 has both F... Nov 9 2020, 09:44 PM pete000 Wow, learn something new every day, I did not know... Nov 9 2020, 10:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 02:52 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.