 Checking spring position for the fan heater flaps |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mcraneiowa |
 Dec 11 2020, 05:00 PM
Post
#1
|
|
Member  Group: Members Posts: 82 Joined: 16-June 20 From: IA Member No.: 24,387 Region Association: None  |
I am reassembling the fan shroud with the heat flaps. I placed the spring underneath the hold down Tab but when working it back-and-forth it works itself up after. I moved it under the bracket against the magnesium bracket. Is that the correct position that is showing in the picture?
 |
   |
 
|
Posts in this topic
Mcraneiowa Checking spring position for the fan heater flaps Dec 11 2020, 05:00 PM
bdstone914 The squared end of the spring should be on the top... Dec 11 2020, 05:15 PM rhodyguy Think 914rubber has the bushings for the bar. Now ... Dec 11 2020, 05:36 PM bbrock The PET shows two of the spring steel tabs (one on... Dec 11 2020, 05:51 PM Mcraneiowa Thanks for the info. I had it under the tab but ... Dec 11 2020, 05:58 PM
Mcraneiowa I figured out that there should be very little ten... Dec 11 2020, 06:29 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st July 2025 - 11:31 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.