 More Transmission Woes, Rod Hits Firewall |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| iiibdsiil |
 Jul 18 2005, 12:51 PM
Post
#1
|
|
Needs Door Locks  Group: Members Posts: 605 Joined: 19-November 03 From: Tampa / Boca Raton, FL Member No.: 1,362  |
Aight, so I got my trans in my 914 today. The rod for whatever reason is hitting the firewall. The shop that built the car for the PO for some reason needed to adjust the length on the rod, as I can tell because it is all welded up and whatnot. The rod hits the firewall for 1st and 3rd. 5th, I can manage to get in. I couldn't find any adjustments, so I am (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) right now. I am not sure why there is now this problem. I am get it into 1st on the floor and it is fine. My shifter has always gone wayyyyyy far forward, and not that far back. Like, if I get too exuberant with my shift, I can hit my hand on the dash. So, what I am thinking is to pull the rod, and shorten it like 1/2" and see if that fixes the problem. Any ideas?
Motor = 3.2 Trans = 901 Side shift Rod = Section between firewall and shift linkage on trans |
   |
 
|
Posts in this topic
iiibdsiil More Transmission Woes Jul 18 2005, 12:51 PM
Joe Ricard Uh better yet you might wantto get a measurement o... Jul 18 2005, 12:55 PM iiibdsiil Well, if I shorten the rod, won't it just reci... Jul 18 2005, 01:07 PM lapuwali There's a pinch bolt that holds the clevis to ... Jul 18 2005, 01:12 PM
iiibdsiil The bushing is definitely in the thing. I will tin... Jul 19 2005, 09:57 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th June 2024 - 06:45 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.